Best holiday decorators near Sherman, MS

The cost to have your house decorated for Christmas depends on the extent of your holiday vision. Interior decorators charge between $50 and $150 per hour on average, so if your decorations are minimal, you could pay as little as $200 for a couple of hours of decorating. Interior decorators might also bill $5 to $12 per square foot, or a flat rate of $500 to $1,300 per room. You can also pay to have your Christmas tree professionally decorated for an average of $200 to $600. Contact a local interior decorator for a specific quote.

It’s unnecessary to tip holiday decorators, and most professionals won’t expect it, but it’s a nice gesture to show your appreciation for their work. If the expert goes above and beyond to keep your delicate decorations safe, or they’re hanging your exterior lights and putting out lawn decorations in freezing temperatures or inclement weather, a tip between 10% and 20% of your total will be appreciated. Large jobs that include interior and exterior work are also good opportunities to tip, especially if your expert is performing a rush job close to the holidays.

First of all, don’t shop for bargain lights—often, you’ll end up with a faulty or broken strand, full of dead bulbs or less-than-luminous brightness. Choose quality lights that will last you many years—LED lights have been known to last as long as 100,000 hours. Second, plan ahead and purchase lights for next year’s Christmas during this year’s post-holiday sales. Finally, have a vision and a plan—if you know the measurements of your home, including any windows, doors, and outside bushes you wish to light up, you should be able to only purchase the necessary lights and not more than you need.

If you need to visually inspect your Christmas lights to determine which are good and which need replacement, there are a few things to look for. First, look for discoloration, such as a dark spot or two on the inside of the glass. The spot is an indication of a burnt filament. Also, look for missing filaments, cracked bulb glass, and broken sockets.