Get matched with top contractors in Sherman, MS

There are approximately 5.33 board feet in a 2x4. You can use the board foot calculator in this article to easily find the answer. A 2x4 is 2 inches of thickness by 4 inches of width, so you need to find the length, with 8 feet being the most common. You’d use the calculator here to multiply 2 times 4 times 8, and then divide by 12, arriving at a total of 5.33 board feet. 

There are a few options if you miss a stud. You can simply patch the hole with spackle, sand it down, repaint it, and then find the stud—essentially starting over. If you don’t want to do that, you can insert one of the more robust drywall anchor options and hang your item on that, but that will only work if the drywall is in excellent condition and the anchor is rated for the weight of the item you’re hanging on it. You may be able to cover the hole with the object itself once it’s mounted, but it’s still recommended to at least fill the hole to protect insulation and prevent vermin from entering.  

Whether or not you can fix water-damaged baseboards depends on the extent of the damage and the baseboard material. Medium-density fiberboard (MDF) baseboards cannot be repaired once severely water-damaged—you’ll need to replace the damaged sections with new baseboards. Wood baseboards may be repaired if the water damage is minimal and only affects a small portion of the baseboard.

Yes, joists are considered structural, as they support the flooring or roofing above them and help distribute the load to the beams, which, in turn, distribute that load to weight-bearing walls or foundational supports directly below them. Joists not only help distribute the load evenly to your beams, but they also provide direct support to the subfloor in flooring systems, which helps reduce creaking and the risk of uneven flooring.