Get matched with top sewer cleaners in Raymond, MS

The type of clog in your sewer main determines the required cleaning method. Different types or methods of sewer main cleaning require various tools like chemicals, mechanical removal, or a combination of both. Some of the most common types of sewer main line cleaning include:

• Minor debris removal: $100–$600

• Tree root removal: $100–$1,000

• Trenchless pipe repair: $60–$250 per linear foot

• General line repairs: $1,000–$4,000

• Full pipe replacement: $3,000–$25,000

If you want to avoid using a snake to unclog a drain, or if you don’t have one, try vinegar and baking soda. Pour 1 cup of baking soda down the drain, followed by 1 cup of white vinegar. Wait for 15 minutes, and then run hot water (but not boiling water) down the drain to see if the clog is clear. Repeat multiple times as needed.

The cost to clean a sewer line is about $370, ranging from about $190 to $550 on average. The specific cleaning method and the problem's severity will impact the project's overall cost. Some of the most common sewer line cleaning methods include:

• Snaking or rodding: $100–$250

• Hydrojetting: $350–$600

• Chemical treatments: $600–$1,000

• Repair or replacement: $1,000–$7,500

Depending on the home, wastewater either goes into a septic tank and seeps back into the backyard or is sent via sewer system to a local sewage-treatment plant. Septic systems naturally separate different components of the waste so that it can naturally and safely disperse it. They are usually reserved for homes not served by a municipal sewage department (like rural homes). A treatment plant, on the other hand, speeds up that process through screening and purification.