Best driveway gate pros near Long Beach, MS

A security door costs an average of $1,400, but costs can range from $600 for a simple screen or steel door to more than $4,600 for a wrought-iron security door. You can also buy specialized locks separately for $200 to $600. If you decide to hire a pro to install your new security door, you’ll spend around $275 to $425 on labor costs.

Fence gates sag because they have no support on the latch side of the gate to help hold them aloft. A gate wheel fixes that problem by providing support for that latch side. Remember that the ground must be level in front of the gate so the wheel can roll freely when you open and close it. If the terrain is uneven or slopes, a gate wheel won’t work.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.