Get matched with top fencing pros in Leland, MS
Top-rated fencing pros.

Need a pro for your fencing service project in Leland, MS?

Select your specific project to find the pro for you.

Find Fencing pros in Leland

Avatar for Luke's Painting Company
Luke's Painting Company
4.4(
40
)

Serving Leland, MS and surrounding areas

In business since 2017

Free estimates

Credit card accepted

"Luke was a gift! I moved from Colorado into a new home in Prattville, walked in the door and immediately realized I couldn’t live with the existing DIY paint job. I called Luke’s Painting, their estimate was $1400.00 less than their competitors, he started painting two days later. Luke was professional, honest, hard working and always cognizant of the fact that I was working from home while he was painting. The finished product is amazing, a realtor commented on how clean the lines are. I couldn’t be happier. Thank you Luke’s Painting!"
After.. what an amazing difference!
After picture of the beautiful entryway
after picture of the fence
after.. beautiful color!
Exterior Painting in Sellers, SC

+76

Recommended by93%of homeowners
Avatar for All N One Home Services
All N One Home Services
4.7(
7
)

Serving Leland, MS and surrounding areas

In business since 2024

Emergency services offered

Warranties offered

"Had a great experience with these guys! Added board and batten to the walls and picture frames molding to the dining room. They were very detailed and made sure we were on the same page the entire project. I kept adding different projects like light fixtures, patching holes on dry wall and much more. I’ll definitely be using them again, as they can do it all!"
Response time8 hrs
Response rate100%
Showing 1-10 of 23
Fencing questions, answered by experts

Yes, you can use a floor jack to remove fence posts. Attach a stem to the base of the fence post so you can position the floor jack underneath. The stem can be a scrap piece of wood attached with nails or a sturdy nail itself. Put the jack beneath the stem and push the lever to lift up on the fence post and remove it from the ground.

A fence installer or homeowner should place a snow fence upwind of the desired drift area, while keeping the prevailing wind direction in mind. When installing a snow fence, its posts should be sturdy, as they will be the weakest areas in terms of tensile strength. Posts should be buried at one-third their height and placed no more than eight feet apart.

You can use pressure-treated wood for a horizontal fence, but you’ll need to purchase a thicker and higher-quality variety to ensure it doesn’t sag or warp after you install it. Use #2 pine grade lumber and boards and thicker dimensional lumber, such as a two-by-six. You’ll also need to use stainless steel or hot-dipped galvanized fasteners, as the chemicals in the treated lumber will cause regular galvanized fasteners to rust. 

The cheapest fence to install is likely to be a wire fence, whether it’s hog wire or chicken wire. Closely following that is something repurposed that would be free to collect, like a DIY pallet fence. Most wire fences are available in large quantities at a low cost, so they’re great for homes with a tight budget.

The most common height of a front yard fence is around 3 feet high, but it can vary depending on your zoning laws. If your fence is meant to create privacy, something closer to 6 feet or higher will do the trick. Most of the time, the highest fence you’ll see is 8 feet tall.

The Leland, MS homeowners’ guide to fencing services

From average costs to expert advice, get all the answers you need to get your job done.