Get matched with top roofers in Flora, MS

Yes, shingles should overhang the drip edge, typically between 1/2-inch and 3/4-inch. An overhang shorter than 1/2-inch can allow wind-driven rain to get under the shingles and damage the roof deck or fascia. Conversely, an overhang longer than 3/4-inch increases the risk of shingles getting caught by strong winds, which can lead to roof uplift. Always check your local building code for exact overhang requirements in your area.

Yes, removing a chimney is a difficult and major undertaking. Chimneys often provide structural support to a home, so if it's a load-bearing structure, you'll need to take extra precautions to maintain your home's integrity. A project of this complexity typically requires a structural engineer, a masonry contractor, and a demolition crew. The removal process may involve taking the chimney out brick by brick from inside the walls. The cost for chimney removal can range from $2,000 to $10,000, depending on the job's complexity. Due to the difficulty and cost, some homeowners opt to remove the fireplace and seal the chimney at the top and bottom, sometimes also removing the visible exterior portion at the roofline.

The best way to know if your roof can support solar panels is to hire a structural engineer. They’ll look at your roof and approve the design of your solar panel system or suggest changes. The best roofing for solar panels is made from strong materials like asphalt shingles and metal, but tile and gravel will work. Softer materials like thatch or temporary structures are not a good fit.

Walking on an asbestos roof can pose a risk. Asbestos roofing materials can become brittle over time, increasing the chances of them breaking or releasing fibers when stepped on. Additionally, walking on an asbestos roof without proper precautions can cause further damage to the material. If possible, avoid touching an asbestos roof in any way and consult with a professional about removing and replacing the roof.