Get matched with top electricians in Decatur, MS

It can be safe to buy or live in a house with knob and tube (K&T) wiring, but only if the system is in good condition, functional, and has been thoroughly inspected and approved by a licensed electrician. Never purchase a home with K&T wiring without getting a professional electrical inspection first.

Key considerations include:

• Safety and Condition: An inspector will verify that the wiring is safe and has not deteriorated. Over time, the insulation can wear away, leaving exposed wires that pose a significant fire or shock hazard.

• System Capacity: The electrical service should be at least 60 amps. However, even at this capacity, K&T systems often struggle to handle the demands of modern appliances and electronics.

• Lack of Grounding: Knob and tube wiring is an ungrounded system, which is a safety concern for many modern devices.

• Ongoing Maintenance: If you live in a home with K&T wiring, it's recommended to have it inspected by an electrician every one to two years to ensure it remains in safe working order.

Ultimately, any inspection or modification of a knob and tube system should always be performed by a certified professional.

It is possible to change a light fixture by only flipping the light switch, but it’s better to be safe than sorry. Exercising extra caution when working with electricity is always important. Take the extra few minutes at your electrical box to cut the power at the circuit breaker. Once you’ve flipped the circuit breaker and the light switch, use a voltage tester to confirm the power has been turned off.

If your outlet is testing fine but keeps tripping, that’s a sign your GFCI outlet is working, but there’s a problem somewhere else. Try plugging in different devices and see if the outlet keeps tripping. If it’s not the appliance that’s causing the issue, it could be a problem in your wiring. Faulty wiring can be a source of electrical fires and other serious problems. We recommend arranging an inspection by an electrician if an outlet appears to be working but keeps tripping.

Yes, a faulty or broken light switch can be a serious fire hazard. Malfunctioning switches often result from loose wiring, exposed connections, or other electrical problems that can cause overheating or sparking. Warning signs include crackling, popping, or hissing sounds when you flip the switch, which indicates live electricity that could ignite nearby flammable materials. If you suspect your light switch is faulty, immediately turn off the power at the circuit breaker and contact a qualified electrician to remedy the issue.