Yes, you can get shocked while using a multimeter if:

• You touch the metal tip while testing a live current.

• The meter isn’t properly rated for the voltage.

• The meter picks up on transient voltage that’s above the range you’ve set.

• The meter has defective parts.

You can prevent shock and personal injury by using a multimeter properly and maintaining your device. 

If you’re unsure how to use a multimeter or want help with your project, contact a local electrician to get the job done.

No. Blue wires and black wires are different. Even though both are used as hot wires, they serve different functions. Black wires are far more common in residential properties. They are always hot, can be positive or negative, and usually carry electricity from a power source to an outlet. Blue wires have a specialized usage in residential properties, generally as traveler wires, and are more common in commercial properties.

The National Fire Protection Association reports that almost half of reported electrical fires are caused by electrical distribution and lighting equipment. The main culprit behind these fires is often frayed, worn, or faulty wiring, particularly in closed-off and concealed areas like attics, where fires can start and burn undetected for long periods.

Daisy-chaining refers to placing multiple GFCI outlets in a row along the same circuit. This won’t do any harm, but it’s of limited usefulness because a properly-placed GFCI can monitor all downstream outlets on its own. Multiple GFCI installations won’t usually increase safety except in special cases.