Get matched with top decorative concrete pros in Beechwood, MS

You should use cement for a chimney crown. The purpose of the chimney crown is to protect the mortar below from water damage and the effects of weather. For this reason, chimney crowns should only be made using cement. When repairing a crown, use caulks and sealants designed for cement repair rather than mortar repair.

The easiest way to handle extra-wet cement is to pour it, let it harden, and then recycle it using one of the methods above. You can also crush it down and sell it for base materials, although this can be pretty time-consuming. Your best bet is to start with less concrete than you need and make more as you go to avoid this problem.

Concrete should be at least 4 inches thick for steps. This thickness boosts stability and prevents cracking and deterioration. After you’ve built your forms out of wood, fill the void with a sand or gravel base for concrete. Use an all-purpose concrete mix to form your steps. After pouring your concrete steps, be sure to screed and float the concrete. 

Thicker concrete is less likely to crack due to extreme weather changes. At a minimum, concrete slabs should be at least 4 inches, but if you’re worried about the concrete cracking under the weight of heavy machinery or from the freeze-thaw patterns of your climate, you should use even thicker concrete. A professional concrete company near you will be able to advise on the best thickness for your climate and use case.