Best sink repair pros near Sappington, MO

Yes, you can install a farmhouse sink on an existing countertop—but there are some caveats. You’ll need to precisely measure. It’s best to choose a sink that’s the same dimensions as your existing sink, since your contractor won’t have to cut the countertop. Otherwise, pay close attention to the depth of your counter (the front to back measurement). You don’t want to install something that’s so big it sticks out beyond your countertop and cabinetry.

The time it takes to install a sink depends on whether you hire a professional or do it yourself, as well as the complexity of the job. A professional plumber can typically install a sink in 1 to 4 hours, with most routine jobs taking around 1 to 2 hours. However, more complicated installations will take longer. Projects that involve rerouting plumbing, installing an under-mount sink, or making countertop modifications can take a full day. Installing a sink with a prefab vanity could also stretch the project to 6 to 8 hours. If you plan to install the sink yourself, you should set aside 4 to 6 hours, though it could take longer. It's also recommended to have a friend help, especially if you are working with a heavy sink made of a material like porcelain.

Porcelain and enamel sinks have very similar appearances, but they aren’t the same. Porcelain is a ceramic made from natural clay, while enamel is a strong powder that’s glazed over a metal sink. Use a magnet to determine whether you have an enamel or porcelain sink. If a strong magnet sticks to the sink, it’s likely enamel. If it doesn’t, you probably have a porcelain sink. You can also use the model number on the sink (often found on the underside of the bowl) or information from the manufacturer to determine the material.

While unplugging your garbage disposal and plugging it back in may help, most units have an actual reset button, a bright red switch found on the underside of your unit. If your garbage disposal needs resetting, you may notice this button sticking out about a quarter of an inch from the surface of the unit, with which it’s usually flush. Simply depress this reset button to reset the unit, and then test to ensure it’s working about 10 minutes later.