Get matched with top door pros in Greenfield, MO

Most modern door knobs will all fit in standard, modern doors, so if you know your door was made in the last 50 years or so, you should be fine buying a standard replacement door knob. The only exception would be a thumb latch handleset for an exterior door, as this type of door knob may not fit your door without drilling a mounting hole for the bottom of the handle. Antique or custom doors might also have different sizes and knob mounting holes, so call in a professional if you don’t believe your door is a standard one.

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

Not every door can be converted into a pocket door. Pocket doors require specific hardware and a hollow space within the wall to slide into when open. The door must be sturdy enough to handle the sliding mechanism but not too heavy, as excessive weight can cause operation and track alignment issues. While some standard interior doors can be adapted for use as pocket doors with the right hardware, it's essential to ensure the door's compatibility and the structural feasibility of creating a pocket in the wall.

You can use a variety of wood to build a barn door, but the most common options include 1-by boards and 2-by boards for the backing and the decorative boards on the front of the door. Softwoods like pine will save you some money and should hold up well, while hardwoods like maple and oak will stand up to more wear and tear. You could also build the backer out of plywood to minimize the cuts you need to make. Whatever you decide on, make sure the width of the wood is compatible with the mounting brackets you buy.