Get matched with top drain cleaners in Fair Grove, MO

Applying drain cleaner is a common DIY solution to clogged drains, but it can be extremely harmful to your pipes and lead to corrosion and leaks. It is almost always better to try snaking a clog than using a drain cleaner, but the best solution is to hire a professional plumber. They can locate the clog and gauge the severity using a camera system and then decide if using a plumber’s snake, auger, or drain cleaner is the best option to remove the clog and limit damage to your plumbing system.

The cost to repair a main sewer line clog is about $3,110 on average. The average cost range is  $1,310 to $4,950, but it can go as low as $215 and as high as $9,300 or more. The cost factors for this repair include the severity of the clog, pipe accessibility, video inspection, removal method, permits, pipe material, labor rates in your area, and time of year. Repairs made from outside during the winter can be more difficult due to the frozen ground or during the spring if the ground is saturated from a lot of rain and snow melt.

Yes, frozen pipes can cause a toilet to stop working correctly. If the pipes are frozen, water cannot flow, which can lead to two main problems. First, the supply line to the toilet tank may be frozen, which prevents the tank from refilling with water after you flush. Second, the drain pipe itself can freeze, blocking water from flushing away. As a temporary solution for a non-refilling tank, you can manually add water, but this is not a long-term fix. To clear a frozen drain pipe, you can try pouring warm water into the toilet bowl or tank and then flushing, as the warm water may help thaw the ice blockage. Ultimately, the best course of action is to unfreeze the affected pipes to restore your toilet to full functionality.

If the drain is frozen, the pipes connecting to the washing machine are likely frozen. If the hot water trick doesn’t also unfreeze the washing machine pipes, you can gently apply heat with a hair dryer on the lowest setting. Start at the end of the pipe closest to the faucet to prevent pressure from building in the pipes, and make sure the faucet is open to drain the water as it melts.