Best interior painters near Brighton, MO

If you recently splashed paint on the wrong area of a wooden object, remove it with a solvent or caustic paint stripper. Some paint that has yet to dry may be removable by hand with coarse sandpaper or a plastic scraper. Another trick for removing dried-on paint is rubbing a dab of nail polish remover on the paint to remove it, but avoid touching the bare wood surface.

Yes, you can paint over old exterior paint, but success depends on the condition of the existing paint and proper surface preparation. If the previous coating is in good shape (not cracked, peeling, or flaky), you can paint over it with less prep work. However, for the most durable and professional-looking results, follow these key preparation steps:

• Clean the Surface: Thoroughly clean the exterior to remove all dirt, grime, and mildew. A pressure washer can be very effective for this.

• Scrape and Sand: If the old paint is peeling, cracked, or flaky, you must scrape off all loose paint. After scraping, sand the surface to create a smooth, even base for the new paint. Sanding is especially important for wood siding.

• Apply Primer: Using a quality exterior primer is highly recommended. It ensures the new paint adheres properly, improves durability, and provides a uniform finish. If you are painting a lighter color over a dark one, a tinted primer will help cover the old color more effectively.

Some brands offer paint-and-primer-in-one products for convenience. Taking the time to prepare the surface properly will not only increase your home's curb appeal but also help protect your siding and extend its life.

Using a wire brush, forcefully scrub the surface to remove paint from metal. You’ll want to remove any lingering rust, too. For larger areas with caked-on rust, you may need to use a wire brush drill attachment. If the paint still won’t budge, apply a chemical paint stripper to the area and scrape off the paint, after following the paint stripper’s instructions.

Yes. It's another reason many people choose to use the spray over an adhesive, as they can change patterns or remove it entirely with ease if they choose. You can use acetone with a rag or a vinegar and water solution (1/2 cup of vinegar to 12 ounces of water) with a cloth to help you scrub away frosted spray glass. NEVER mix these two methods together, though, and always work in a well-ventilated area.