Best interior painters near Sebeka, MN

Think hard before deciding to German schmear your home’s exterior brickwork. If you do not like the look, you are pretty much stuck with it, as it is impossible to remove this finish the way you can remove paint. You risk damaging the underlying brick if you have to chisel and acid-wash it away. It will also take a very long time, and remnants of the mortar wash will always remain.

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

You can apply waterproofing over paint, but you won't get as much protection as you would if you painted the surface with a waterproof paint from the get-go. Not all waterproofing methods are compatible with painted surfaces, and they may not adhere well. This is especially true if the paint is glossy, old, or flaking. Waterproofing sealers are primarily meant to be applied to porous surfaces, like concrete, wood, or brick. 

With patience, you can often save a dried paintbrush. Soak the bristles overnight and clean the brush as you would any other time. You'll likely have to repeat the cleaning steps, including soaking, more than once.