Get matched with top driveway gate pros in Pipestone, MN

To make your gate safe, purchase a gate made from strong material such as wrought iron, stainless steel, or other metals. Ensure that the gate has strong joints and bars that are welded on rather than inserted loosely. If you’re concerned about people climbing over your gate, you can deter them by installing fence spikes along the top as an extra precaution.

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

When choosing a driveway gate, consider the fence material, whether you want an automatic gate or a manual one, and property limitations like the slope of your driveway. We recommend speaking with a professional driveway gate installer to see what types of gates will work on your property based on your fencing or home’s exterior. Keep in mind that driveway gates should range between 10 to 12 feet wide to ensure cars can easily maneuver through the gateway.

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.