Top-rated gate repair pros.

Get matched with top gate repair pros in Pipestone, MN

Enter your zip and get matched with up to 5 pros

Need a pro for your gate repair project in Pipestone, MN?

Select your specific project to find the pro for you.

Find Gate repair pros in Pipestone

Gate Repair questions, answered by experts

Automatic gate openers last around 10 years, but this time span depends on several external factors, like the type of gate they're attached to and how well you’ve kept up with general maintenance. Despite lasting a decade, you should still expect to complete one or two repairs in that time, as some components will fail before others.

Gates are often stuck halfway due to physical blockages or damage to the rollers, wheels, or tracks the gate runs on. Check to make sure there are no obstructions before considering that the motor might be burned out or malfunctioning somehow. Hopefully, the issue is simple, and you can remove it with a broom or your hands, but if your gate is stuck and there's no obvious reason why, you should call a pro to diagnose the issue.

Double gates come with the same gaps as single gates, with hinges taking up a quarter of an inch of space. The difference is that double fence gates also have a center gap, which needs a little more clearance. Space the center gap at half an inch instead of the usual three-eighths of an inch for a single gate. 

No, you can’t use a garage door opener as a gate opener. Automatic garage door openers and automatic gate openers serve similar functions and may even operate similarly via remote control; however, they aren’t interchangeable. Garage door openers aren’t intended for outdoor use and can’t withstand exposure to the elements.

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.

The Pipestone, MN homeowners’ guide to gate repair services

From average costs to expert advice, get all the answers you need to get your job done.