Get matched with top animal fencing pros in Mora, MN

Do you need a permit to build a fence if you are simply replacing an existing fence? Whether you need a permit in this case depends on your local laws and regulations. Most municipalities consider a fence replacement project as being equal to building a new fence, so you likely will need a permit. Check with your local building inspection department or zoning department to see if you need a permit. If you hire a local fence contractor, this pro can take care of obtaining all permits for you.

When considering how much of a gap should be under a fence or gate, a good rule of thumb is to keep gaps between 2 and 5 inches tall. This allows for some ground clearance for the gate but still provides safety for children and pets, who shouldn’t be able to squeeze through a gap of that size.

Pallet fences come with built-in support through the fence posts you should install on each side of their vertical interior. Stand the fence upright and slide it onto the fence posts, then further support it with 2x4 wood boards that you drill across each point where two pallets connect side-by-side.

Since wood is weaker when installed horizontally versus vertically, a horizontal fence is prone to sagging. You can prevent this drooping from happening by building a sturdier fence. Use softwoods that are more stable, such as cedar and redwood, or denser hardwoods for your fence materials. If you can’t afford these pricey materials, use thicker two-by-six pressure-treated pine boards or shorten the span the fence boards have to cover by installing more posts.