Is a wood or steel beam better in a home?

• <div><p>A steel beam is stronger than a wood beam and requires fewer vertical supports underneath, which means it’s a better option for larger structures or if you want an open space under your home that doesn’t have posts as obstructions. However, <a href="https://www.angi.com/articles/how-much-does-steel-i-beam-cost.htm">steel I-beams cost</a> more than wood ones, and they can be difficult to install retroactively, as getting them into the basement area can be challenging, if not impossible.</p></div>

Get matched with top welders in Kenyon, MN

Q: Why should I pick steel I-beams?

• <div><p>Steel I-beams are an increasingly popular choice for supporting a structure because they support a large amount of weight with a small profile and without the need for load-bearing walls or supports underneath. This allows for more open floor plans, which most people tend to prefer. They also resist fire, pests, and rot and last for the lifetime of your home.</p></div>

Q: Do welders need to be licensed or certified?

• <div><p>Some states require welders to be licensed and certified, while others don&rsquo;t. However, it&rsquo;s always a good idea to hire a licensed welder, regardless of requirements in your area, especially if you need welding for structural components of your home or gas lines. Licensed welders have gone through training and testing to prove their skills, so they&rsquo;re less likely to make a mistake that could be detrimental to your home. Use Angi&rsquo;s <a href="https://www.angi.com/angi-license-check.htm">state licensing tool</a> to determine whether your potential hire has a welding license.</p></div>

Q: Are beams and joists the same?

• <div><p>No, beams are the primary load-bearers for flooring or roofing systems, and they distribute the weight of the structure to your foundational supports, while joists bear far less weight and distribute their loads to the beams. Beams are usually thicker and longer, and they have support posts or foundation walls beneath them for support.</p></div>

Q: What’s the difference between a lintel and a beam?

• <div><p>The difference between a lintel and a beam is what loads each is responsible for supporting. A lintel is a type of beam that is responsible only for supporting the load above an opening, such as a window or door, and transfers the weight to the side walls around an opening. A beam supports the slab and transfers the load to nearby columns, which then disperse the load to the ground.</p></div>

Enter your ZIP and get matched with up to 5 pros

Need a pro for your welding project in Kenyon, MN?

Select your specific project to find the pro for you.

Verified Reviews for Welding pros in Kenyon, MN

*The Angi rating for Welding companies in Kenyon, MN is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

*The HomeAdvisor rating for Welding companies in Kenyon, MN is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Welding needs.

Last update on November 23, 2025

Reviewed in October 2024
As a new employee at JF Fence with 15+ years experience I've never been happier. Working for a family man building a top quality company that wouldn't leave any fence in any other condition other than if it was his own. He is of the highest integrity and always gives 110% to not only please his...
JF Unlimited
Request a quote
Reviewed in April 2021
Great experience - David was very responsive, and easy to reach through a variety of ways (phone, email, or text). Explained the process well and gave several options to address our issue. Work was done efficiently, and we are very pleased with the outcome!
Fat Catz Fabrication & Repair
Request a quote
Reviewed in March 2015
They did an excellent job. There were several peices of equipment and he was able to remember everything I requested and did exactly what I asked him. He completed the work in a very timely fashion. I would use him again and will recommend him to others.
ANDERSON WELDING & BOAT DOCKS
Request a quote
Reviewed in May 2016
Dave never oversold or interferred with my initial idea. When we ran onto a unusual design issue he asked me to come to his shop and showed me options to resolve what could have been a problem. His patience and understanding was remarkable. He was always concerned that from initial design to...
NC Shegstad & Sons Ornamental Ironworks
Request a quote
Reviewed in December 2015
It went well. The work was performed while I waited. It was a short wait. The fee was very reasonable. I asked the owner for additional spot welds for my piece of mind. The weld is holding strong after 21 months of heavy use.
Krech Iron Works
Request a quote
Reviewed in October 2013
I brought the boat to Dave received an estimate of cost and time to complete. Boat was done on time and within the budgeted amount. This was not a big job, but not easy as you had to weld directly over your head. Had a chance to look around his shop some impressive projects going on. I have...
Arc Kings Welding
Request a quote
Reviewed in September 2008
The owner is a great guy to deal with. He is polite and has a very good personality. He's always there for you. If you need something you could call him at home if need be. If you have a problem getting something, he'll get it for you. He has great prices too.
METRO WELDING SUPPLY LLC
Request a quote

Find Welders in Kenyon

JF Unlimited

5.00(

)

JF Unlimited

5.00(

)

Customers say: Quick response

Recommended by 100% of Angi customers

We are a small business that does not use subcontractors. We believe in quality work and customer satisfaction. We install any style of fence and use only the highest quality materials. Call -or- click to schedule your free estimate today!

"I have worked on multiple jobs with Jim and his crew. They have done absolutely outstanding work for all of their customers. Not only does Jim have exceptional knowledge of fencing, but it has also had many years in the field of building them. What also makes me give them a high ranking is that they are a local company that is a family based company and has integrity. I would highly recommend anyone to them who is looking to get a project done."

Charles J on October 2024

"I have worked on multiple jobs with Jim and his crew. They have done absolutely outstanding work for all of their customers. Not only does Jim have exceptional knowledge of fencing, but it has also had many years in the field of building them. What also makes me give them a high ranking is that they are a local company that is a family based company and has integrity. I would highly recommend anyone to them who is looking to get a project done."

Charles J on October 2024

Get matched with top welders in Kenyon, MN

Enter your ZIP and get matched with up to 5 pros

Need a pro for your welding project in Kenyon, MN?

Handyman for Multiple Small Project Service

Faucets, Fixtures and Pipes Repair or Replace

Wood Fence Installation

Verified Reviews for Welding pros in Kenyon, MN

Find Welders in Kenyon

JF Unlimited

JF Unlimited

C&A Repair

C&A Repair

Under the Sun

Under the Sun

beamsmith

beamsmith

Schroeder customs

Schroeder customs

LR Services

LR Services

S & P Corporation

S & P Corporation

lit up welding

lit up welding

Shelly Campbell Studios

Shelly Campbell Studios

Campbell's Welding and Metal Repair LLC

Campbell's Welding and Metal Repair LLC

The Kenyon, MN homeowners’ guide to welding services

How Much Does Welding Cost? [2025 Data]

Find Welding Pros in other cities near youNot finding what you are looking for in Kenyon? Check surrounding areas for Welders.

Which Welding task are you tackling?Find Kenyon Welding services on Angi who specialize in any of these tasks

Find Pros for other jobs in KenyonIf your Welding services job is complete, use Angi to find quality Pros in Kenyon for any number of jobs.