Get matched with top buffing and polishing pros in Ivanhoe, MN

Buffing is a less expensive and less time-consuming alternative to other floor repair techniques, but it’s only ideal for removing surface-level scratches and damages. Floor-buffing machines work to gently smooth out the floor’s top layer rather than removing it the way that sanding does. 

This process is ideal for gently worn floors, but it won’t have the desired impact on floors with severe damage. On the other hand, sanding fully strips the floor’s top layer so damages beneath the surface are accessible to remove or repair. Since the process is more involved, it requires more time, tools, and experience to achieve the best possible results.

The cost to polish floors averages around $200 per room, but you could pay anywhere from $100 to $300. Some factors that influence the total cost of floor polishing include the following:

• Square footage of flooring

• Type of floor 

• Whether you need floor repairs done beforehand

• Whether or not you want professional floor cleaning done beforehand

Since square footage is the most significant cost factor, you might get a more accurate estimate by using the average cost per square foot for floor polishing, which is between $1.00 and $2.50.

It depends on the material. Sandstone, slate, and granite can be slippery in wet weather. Applying a sealant to the stone can often stop it from absorbing moisture and may reduce the likelihood of slipping. If you're concerned about losing footing, a safer option might be bluestone or concrete.

Unsealed granite is more susceptible to staining and other damage. Regularly sealing your granite countertops decreases the chances you’ll need to repair damaged countertops in the future. It also keeps it looking shiny rather than becoming dull over time. You can check whether your granite needs resealing by putting a few drops of water on the counter and waiting 15 minutes to see whether the water permeates the surface.