Get matched with top concrete finishing pros in Hillman, MN

The curing time for troweled concrete depends on different factors. The type of concrete mix used in the project can impact the time it takes for the concrete to cure, and climate conditions such as moisture and humidity can as well. It can take several days to a few weeks for concrete to fully cure, depending on the concrete mix.

A layer of exposed aggregate concrete should be 1 to 2 inches thick if you’re installing it on top of existing concrete. If you’re pouring a new slab with the finish, slab thickness will depend on the application. Exposed aggregate concrete driveways should be 4 to 6 inches thick in most cases or 8 to 12 inches for commercial vehicles. Sidewalks, patios, and walkways should be 4 inches thick.

Cement companies offer a wide variety of services, including delivering and pouring concrete for home foundations, walkways, patios, driveways, concrete steps, pools, pool decks, and more, plus concrete repair and patching. Most companies also have the ability to demolish and haul away old concrete landscaping features. It’s a good idea to reach out to a few different companies before hiring to make sure you choose one that can tackle the entirety of the project you have from start to finish. This method will typically save you some money over hiring multiple contractors.

There are a few different types of finishes to choose from for the final step of the project. 

Water-based polyurethane sealants emit fewer odors and fumes but dry quickly, which can pose a challenge when trying to get a smooth coat. Oil-based polyurethane sealants let out more odors and fumes into the air (it’s especially important to wear a respirator if you choose this type), but they take longer to dry, which can be more forgiving during the finishing step. 

Some may prefer wood oil to polyurethane because rather than creating a layer, it becomes part of the wood. Wood oil takes longer to dry, and is less resistant to wear and tear; however, it creates a natural-looking result by enhancing the grain of the wood.