"Our project was actually a crawlspace encapsulation. We have a lake cabin that was built in the 1960's. It had a dirt floor in the crawlspace with bare block masonry foundation walls. It also had old, damp batt insulation that was falling down from the joist spaces. American Waterworks came in, removed the old insulation (a nasty job!), laid down a 2 layer moisture barrier system and spray foamed the foundation walls and rim joist area. I can't believe what a difference this has made to our air quality, much warmer floors. We used to have to wipe down the windows every morning during the winter because of condensation. Not any more! I would highly recommend this company if you have the same needs!!"
"Gregg and Gunnar did a fantastic job of lifting and sealing my garage floor. After 20 years of slowly failing, sinking, and cracking, they were able to get it back to an acceptable condition. It'll never be "flat" like freshly poured concrete but, it is so much better after their work. They took the time to explain the process and also any areas where they were unable to get the slab perfectly flat again, and they explained why. They were quick, cleaned up after themselves, and patiently explained the process and results"
Clint arrived on time for our sales call. He was prepared with information and samples and provided guidance when needed. We wanted to think about the purchase, since it was an expensive shade option - he did try really hard to get us to make a decision before he left. I wasn't crazy about that - it felt pushy. Clint was very upfront about the cost being more than most awning companies, but he did all the measuring and the product is a quality product. We liked the product and the Angie's List discount that was offered, so we called him back within a couple of weeks and made the purchase.
The installers arrived on time and were very careful to remove all the deck furniture before starting work. They cleaned up after themselves and put the furniture back when finished.
Our awning is quite large - 30 feet long. It does a great job of shading our deck and looks very nice. It's motorized; the wind sensor is great since it almost takes care of itself. We would definitely get an awning again and would recommend this company
"The estimate was in our budget range and included a narrow sidewalk to our back fence gate. Total square footage was just under 500 square feet which made a nice front patio area. The workmanship was top notch and we have had many compliments from neighbors and friends."
At Earthscape, our uncompromising dedication to quality craftsmanship ensures that every project is approached individually, creating a personal masterpiece that meets the needs and expectations of our clients, from design to completion. We specialize in landscape and architectual stone masonry (interior & exterior). Examples of our work include: Fireplaces(indoor & outdoor), walls, flooring, facing, patios, and pool decks. We also make custom birch and stone furniture and furnishings. Let our team go to work and add the beauty and strength of natural stone to your home and landscape, creating your perfect little corner of the world.\n \n
Blake DePyper Masonry prides our company on providing the highest quality in service. Call today and we'd be glad to add you to the long list of satisfied customers.
Call Cory Christians Concrete & Masonry for all of your brick, stone, and concrete needs. We have the quality and experience that you want in your home. Call now!
You should generally drill into the mortar joints when installing shutters on brick. Mortar is softer, which makes drilling easier and puts less strain on your tools. It also lowers the risk of cracking a brick—something that’s a lot harder to fix. Mortar holds fasteners well enough for standard shutters, and if you ever need to patch the holes later, it’s a much simpler job than dealing with damaged brick. Just keep in mind that if your mortar joints are too thin or the hardware calls for brick anchoring, you'll need to check the manufacturer’s recommendations and adjust accordingly.
Certain towns and homeowner associations (HOAs) ban brick mailboxes because of the risk of obstruction. They are sometimes only permitted in cases where four or more homes share a mailbox. Homeowners may need to obtain special permits in some locations. One of the top masonry contractor hiring tips is to ask a local pro if they can show you examples of recent work that meets local code regulations.
When painting brick, each application method has pros and cons. Spraying is much faster but may not penetrate the porous surface of the bricks. Rolling is effective for getting paint into the bricks but doesn't work as well on the mortar. Brushing is very time-consuming and also won't penetrate beyond the surface. For the best results, a combination of spraying and rolling is often recommended. If you use a roller, choose a thick option (at least a half-inch) and ensure the paint gets into all the crevices for even coverage.
There are many things to look for when buying a brick house. Here are some of the key things you should pay close attention to.
Lintels: Look for cracks, holes, displacement, or corrosion
Mortar: Check to see if the mortar is old and crumbling, in need of repointing, or new. Also check to see if the mortar has a professional finish.
Walls: Check along each side of the house. If a wall is bowing outward, this indicates a severe issue such as foundation damage or that the walls are ready to fall.
Cracks: If there are stair step cracks in the brickwork, this indicates an unstable foundation.
Mortar is a mixture of sand and cement that binds materials, such as bricks, stones, and concrete blocks, together. Think of it as the glue that fills in the gaps between bricks and stones, then seals them in place to prevent damage or deterioration. Mortar also helps spread the load across a wall or structure, keeping cracks and shifting at bay.
The Canby, MN homeowners’ guide to masonry services
From average costs to expert advice, get all the answers you need to get your job done.
Door or window lintel replacement costs $400 on average, but there are ways you can save. On the other hand, complicated work will increase costs considerably.
This guide features information on the costs to repair a brick wall, whether or not you need a brick mason to complete spalling, tuckpointing, or a full restoration.
Need to repoint brick in your home to make your home look fresh and new? Use this guide to repointing brick cost to price out your project before starting.
Discover the wide variety of masonry materials for your next home upgrade project. Our guide covers the different types of materials to choose from and more.
When it comes to masonry versus concrete, it can be easy to confuse the two. Use this guide to learn about the differences in appearance, strength, and more.
