Get matched with top driveway gate pros in Backus, MN

Ideally, a gate should be able to swing both in and out. However, if it can only open in one direction, it is generally best for it to swing inward. This is often the safest option, especially for deck gates near steps, as you'll want the gate to swing away from the stairs. An inward swing also prevents the gate from opening into a public space, like a sidewalk, and can be more convenient when carrying heavy items like a wheelbarrow into a garden.

There are exceptions, however. The layout of your property may require a different approach. For example, if your property is on a slope, the gate may not be able to swing inward. You should also ensure the gate can open fully without colliding with any objects or blocking access to other areas. For a backyard garden gate where public access isn't a concern, the direction it swings is largely a matter of personal preference. Finally, always check your local building codes, as they may have specific requirements for which way a gate must swing.

Whether you can attach a wood extension to a vinyl gate depends on the gate's construction. Some vinyl gates are sturdy enough to allow wood or vinyl boards to be attached. Many, however, have hollow frames that may not hold screws or heavy extensions securely. For these, consider alternative extension options such as a rubber flap or chicken wire.

Other mechanisms can help you keep your gate securely shut. Secure gate latch types will do the job, such as magnetic or spring-loading, self-closing lever varieties, or automatic gate openers. However, they won’t control the speed at which the gate closes. You can purchase slam plates that use rubber buffers to reduce noise and the potential damage-inducing impact of a fast-closing, heavy gate.

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.