Get matched with top driveway gate pros in Akeley, MN

Thieves can open almost anything with enough time and the right tools, but they also prefer easy targets that are unlikely to get them caught. Forcing open gates is loud and difficult, and to be able to open one electronically requires extensive knowledge of the system, which most thieves don't have. Electric and other security gates are great deterrents because the thief will move to an easier target. If the thief is determined to enter your property, they will most likely find a different entrance point.

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.

Generally, the standard 10- to 12-inch-long and 1- to 1.5-inch-diameter gate springs will work. However, if you have an especially wide, thick, or heavy garden gate, you may need to opt for a longer, broader—and pricier—model to ensure secure closure and good longevity. These typically range between 12 and 16 inches long and are over 1.5 inches in diameter.

If you only use your gate as a pedestrian, walking through without a vehicle, you’re fine to stick with a single fence gate. If your fence opening needs to accommodate vehicles of any kind, from cars to trucks to 4-wheelers, then a double fence gate will suit the space much better and give you more freedom.