Get matched with top carpenters in Adrian, MN

"Found Sentri on Angi. Jeanette and Violet were very pleasant and efficient in getting a contractor to me in the time frame needed. The contractor was excellent and the roof looks great! I would definitely work with them again if I had additional projects."

"Hal's work is top-notch but I grew increasingly frustrated with the timing and inconsistency of his work habits. His was one of several estimates I received and basically he said he would beat any estimate I received. The difference is that everyone else was going to use cedar and he only works with pressure-treated Southern yellow pine, which is less than half the cost of cedar. I was unsure of the durability and longevity of that product so I did extensive research online. Still unsure, I drive around the Twin Cities to see other jobs Hal did that gave stood the test of time and I decided to move forward. Clearly, the way he builds his fences require considerably more manual labor than those built with cedar posts and pickets so essentially instead of paying for the higher cost of cedar, you pay for increased labor costs. Unfortunately, Hal isn't as going as predicting when he will get jobs complete as he is completing them well. He was over a month late in getting started and I repeatedly had to call him to inquire about the delay. It was quite frustrating but since I didn't absolutely need the fence done by a certain date, I decided to practice patience. Once he finally started, most days he and his helper only worked 4 hours so the project dragged on far longer than I thought it would. Admittedly, there were a couple of weather-related days but other times when it was a perfect day, they wouldn't show up and I would give no idea when they were coming again. After I told him I really needed to have him be more communicative, he was and within a short time after that conversation, he completed the fence. The fence is beautiful and appears very sturdy. We'll see how it withstands time and weather but for now I am very happy with it. Hal does beautiful work but if you are on a strict timeline I would not recommend working with him. If you are flexible and don't mind putting more effort into communication, he is a great person to work with.
"

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"The designers were very nice.  However, they only recommended/carried a litmit number of suppliers - few of which were in Indy.  The suppliers they carreid were also very expensive.  Even though I sent pictures, I found that I needed a designer that could come to the house and help find local suppliers for paints and material."

We have the experience and dedication to bring your dreams to reality! Specializing in Remodeling Services, we guarantee your satisfaction, and we won’t leave until the job is done right. We pride ourselves on the quality work we provide, while delivering great customer service! Call or click to schedule a free estimate today!

"I sent the money and dimensions in in November 2011.  She responded back very quickly, informed me that she was very busy and wouldn't be able to start on my project for a couple of weeks.  I actually responded that that was fine.  After a month or so with no contact, i emailed.  She emailed  right back, apologized and asked for some more measurements.  I sent them.  Didn't hear anything, when in response to inquiry, she asked again for living room measurements-- that was Feb. 3rd.  On Feb. 20th, I emailed and asked for timeline.  She responded back the next day with 3 designs asking for my preference.  I emailed back on the 22nd of Feb with my preference.  On March 16th, I inquired again as to timeline for completion.Two weeks later she sent a concept board with some furnishings.  No window coverings or lights were suggested.  Three were multiple rugs with no direction of which one for each room.  All and all, not a pleasant experience.  I suspect I could have gotten better service using Pottery Barn's free design service (especially since most of the furnishings came from there.)"

"This was the service provided by AHS's contractor Myers Comfort Specialist.  They would only provide a 2hr window with a 30 min notice of when they would be there. They agreed to come out between 3pm - 5pm that day; later around 4:30 I call to see when they would be out and discovered the tech had call the wrong number and they couldn't come out until the next day. The tech came out and diagnosed the problem, but he need a part. Later that day, when I called to inquire about a time frame I was told by a supervisor that the technicians do not turn in paperwork until the next morning and then the part would be ordered. I received a call the next day that the part was available, but they could only come out between 1pm and 5pm with a 30 min notice. I ask to schedule the first appointment for the next day and was told they would set up a time to be out between 8am - 10 am with a 30 min notice. At 10am the next morning, no call, no show. I called MCS and was told the technician was delayed at the warehouse picking up the part and would call shortly. (I'm not sure why the part was not picked up the day before when they said the could come out?) Also called AHS and explained the situation and asked to have the $75 service fee waved, which they agreed to do. The tech arrived about 11am installed the part and was finished about noon. Between the initial call and the repair visit I end up missing almost a whole day of work.
"

"Clint Hansen, the president, worked thru the quote and proposal with us, then communicated regularly with us on progress, etc. The building crews worked efficiently thru fall and winter. Made great progress against the quoted schedule. Work changes were executed well with the foreman and Clint, some smaller ones on the fly. Responsive to come back and adjust things where needed. Cleared up work area daily. Installed new sod where work vehicles had damaged the lawn. Subcontractors (electrical, HVAC) did good work as well. Payment plan in 3 phases. Took care of city permits and inspections. We installed carpeting ourselves but they came back to install baseboards afterwards.
Good company to work with, great value for the cost.


"

tree removal , tree works , specialize in high risk climbing, do tree trimming, tree shaping, tree topping, all shrubs, bushes, hedges trimming. Stump removal and grinding. Tree planting, nursery stock- \nAll modes of landscaping, retaining walls, stone, timber and rock walls- rock and mulch beds- dry river beds- drainage systems, water run-off - will do some decks, fencing- just ask we probably do- any questions just ask Jesse he does it all.

Vinclai South Dakota is an all around handyman, home repairs, fence repair service based out of Sioux falls, SD. I have over 10 years of experience in the home repair industry and I treat my customers homes like I'd treat my own. My crew is dependable, honest and extremely trustworthy. When you hire us, you're hiring a team of professionals who are trained and skilled to deliver lasting value to your home.\n\nAs a locally owned and operated business we feel invested in our clients and constantly strive for customer satisfaction. We won't leave until the job is done right! Call or click to schedule an estimate today