Get matched with top driveway gate pros in Williamsburg, MI

While many gate hinges are often made of extremely durable materials, such as galvanized steel, they can wear out after many years. How quickly they wear out also depends on how much use they’ve endured. It’s also possible for the hinge screws to fall out, which weakens the hinge. Once a hinge wears out, it’s time for a replacement so your gate doesn’t start sagging.

The best direction for a gate to swing depends on its location and purpose, but swinging inward is the general rule. An inward swing is often considered safer, prevents the gate from opening into public spaces like a sidewalk, and may be required by local building codes.

There are exceptions and specific considerations. If your property is on a slope, an inward swing might not be possible. For a deck gate, it's safest to have it swing away from any steps. In a backyard, the direction can be a matter of preference, though an inward swing can be helpful when carrying heavy items like a wheelbarrow into a garden.

Regardless of direction, ensure the gate can open fully without hitting any objects or blocking spaces. While an inward swing is standard, a gate that can swing both in and out offers the most flexibility if your setup allows for it.

To stop trash from blowing under your gate, you can install anti-litter netting. This solution prevents most large debris from being blown inside of a controlled area and is often used in construction sites. Many types of netting are not designed for permanent use, so you may need to search for a style that matches your gate color.

In most cases, you will need a permit to install a new driveway or property gate. An exception might be if you are simply replacing an existing gate. Before issuing a permit, your local municipality may require a site plan or survey to verify property lines and prevent encroachment on a neighbor's property. Permits for a gate typically cost under $100. Be aware that corner properties may have additional restrictions on gate height or style. It's wise to confirm permit requirements with your local building department or your gate installation company, which can usually handle the entire permitting process for you.