Get matched with top toilet pros in Vanderbilt, MI

You definitely can over-tighten toilet tank bolts. Unlike some other materials, porcelain can’t bend or flex, so when you over-tighten a screw into it, it could break against the added pressure. Only tighten them as much as needed to keep them in place and firm; any more and you could risk breaking the porcelain.

A high pitch noise after flushing is likely caused by the fill valve being clogged with debris. You can repair this and eliminate the noise by removing the fill valve from the tank, and then cleaning the valve screen. Place the clean fill valve back in the tank and flush as normal.

Yes, you’ll need to replace your toilet’s wax seal any time you move the toilet. This is because movement of the toilet will break the seal, rendering the remaining wax useless. Thankfully, replacing a wax seal is fairly easy, and the seal itself only costs $2 to $10 at most home improvement stores.

When replacing a wax seal you typically also have to replace the closet bolts that secure the toilet to the flange. These are usually about 2.5" - 3" long and have to be cut once the toilet is secure. Cutting them usually makes them too short to reuse.

The cost to install a new toilet typically runs from $225 to $530. This doesn’t include the price of the toilet itself, which can cost $90 to $1,500 depending on the model and features you choose. You can save money if you choose to install a toilet yourself. However, you might want to hire a pro for this project.

"Due to the many complexities of replacing a toilet flange, it is typically a job best left to the pros," says Jeff Botelho, Angi Expert Review Board member and plumber. "Many times it isn't as simple and straightforward as 'pop off the old one and pop on a new one' because the flange is either glued on (PVC/ABS), soldered on (brass/copper), or caulked in place with a lead & oakum joint (cast iron) and none of these things can be easily reversed without years of training and repetitive practice."