Get matched with top marble restoration pros in Sumner, MI

Silestone® is heat-resistant, so it can handle moderately high temperatures for a short period of time. That said, exposure to high heat can cause serious damage. You should never take a hot pan off the stove and place it directly on your countertop. Temperatures above 300 degrees Fahrenheit can leave marks or discoloration on the surface. Instead, use a trivet.

You should always seal cut countertops to prevent damage and to keep them looking their best. The right way to seal countertops depends on the type of material. For laminate and wood, apply epoxy or other specialty sealers by pouring it onto the countertop and letting it flow across the whole surface to the edges, guiding it with a paint stick or putty knife. You will need to move quickly so that it does not dry or harden before you are done. For stone countertops, use a sealant specially manufactured for your type of stone and apply it according to manufacturer directions. 

Deciding between marble and granite for kitchen countertops depends on your personal priorities, budget, and style. Both materials have similar costs for material and installation.

Marble offers a luxurious aesthetic and timeless beauty, but it is more expensive and requires more maintenance. It is susceptible to staining and etching from acidic substances like coffee, wine, or tomato sauce if spills are not cleaned up quickly.

Granite is highly durable, heat-resistant, and easier to maintain, making it a practical choice for busy kitchens.

Both materials should be sealed to protect against damage, but they can still be vulnerable to stains if spills are left on the surface for too long.

Unsealed granite is more susceptible to staining and other damage. Regularly sealing your granite countertops decreases the chances you’ll need to repair damaged countertops in the future. It also keeps it looking shiny rather than becoming dull over time. You can check whether your granite needs resealing by putting a few drops of water on the counter and waiting 15 minutes to see whether the water permeates the surface.