According to the National Fire Protection Association’s Code NFPA 25 (titled “Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems”), private fire hydrants must undergo inspection once per year, with an accompanying flow test and any necessary maintenance performed on the same schedule. Keep in mind that your town, city, or county may adopt more or less strict testing requirements. 

Your smoke detector might be too high in some homes or circumstances to reach yourself. If you feel unsafe getting on a ladder to replace your hardwired smoke detector, call a licensed electrician or local handyman to knock this project off your to-do list. If you have a battery-operated smoke detector, your local fire department can change the batteries or help you replace the detector—just make sure you call the non-emergency number.

In any case, do not let this project go unresolved, as it could turn into a huge safety issue.

If you plan to put a fire pit on a grassy area, be sure to put compacted paver sand down first to help level out the ground and add better heat protection. If you’re placing a fire pit on hardscaping, like a concrete patio, consider placing a fire pit mat down first. This can add more protection from the heat and also protect the look of your hardscaping if you choose to remove the fire pit in the future.

A chimney requires both a cover and a cap, but these parts often get confused with one another. A chimney cover seals the top of the chimney around the flue pipe to prevent water from entering the chimney. A chimney cap is a piece that sits above the flue to prevent animals, debris, and water from entering the flue.