Get matched with top dishwasher installation pros in Saint Clair, MI

To get rid of standing water in your dishwasher, first try activating the drain mechanism by pressing and holding the cancel button for at least three seconds. If that doesn’t work, you’ll need to do some troubleshooting to drain the standing water from the dishwasher. This will involve shutting off the power, then scooping out the water, cleaning the drain filter, and clearing the air gap. You’ll also want to run the garbage disposal and check the drain hose for clogs.

Water is sitting at the bottom of your dishwasher, likely because the filter is dirty with food debris or because the drain hose has a clog. If the water is still sticking around after following the steps above, it’s time to contact a local plumber.

You can repair minor damage to a dishwasher drain hose with tape designed to handle moisture but it’s probably better to simply replace it. Dishwasher hoses are inexpensive items that, although they require some muscle to change, are best swapped out. You don’t want to find your kitchen has flooded because of a faulty part that usually costs between $10 and $30.

Some signs that your dishwasher is going out include:

• The door no longer latches 

• Dishes are still dirty after a cycle 

• Dishes are cold after a cycle 

• Rust inside or outside the unit 

• Cracks inside the dishwasher tub

• Water collecting at the bottom or outside the unit

If your dishwasher is not energy-efficient or is older than 10 years, you should also consider replacing it. Repairing an older model may be more expensive than replacing it with something newer and more energy- or water-efficient.