Best marble restoration pros near Pellston, MI

Onyx countertops have pros and cons. If you seal it properly and take care not to damage it, it can make a good countertop surface. However, it's more often used in bathrooms, where it’s less likely to sustain damage. Having an onyx kitchen countertop is possible, but you’ll need to take extra care not to burn, stain, or otherwise damage the material.

The frequency for sealing granite countertops depends on several factors, including the type of sealant used, the color of the granite, and how heavily the countertops are used. As a general guideline, resealing is often recommended every 12 to 18 months, but some sources suggest it could be as often as every few months or at least once a year.

The type of sealant is a major factor: water-based sealants may need reapplication every six months to a year, while more durable solvent-based sealants can last for five to 10 years. Additionally, factors like heavy kitchen traffic, frequent use of acidic cleaners, and lighter granite colors may require more frequent sealing to prevent staining.

To determine if your countertops need resealing, you can perform a simple water test. Place a few drops of water or a wet paper towel on an inconspicuous area of the granite. After 10 to 15 minutes, check the spot. If the water has beaded up, the seal is still intact. If the water has been absorbed and darkened the stone, it's time to apply a new coat of sealant. You can choose to seal the granite yourself or hire a professional to ensure it's done correctly.

White quartz is a very low-maintenance countertop material. It’s nonporous, so it won’t stain, even if you spill dark liquids on it. The light color will make dirt show up much easier, but a simple wipe-down will keep the countertops looking fresh and bright for years to come. However, it might not be the best kitchen countertop idea on a budget because it's expensive.

Overall, granite tends to cost more than marble. Prices for each material will fluctuate depending on the source of the stone, your location, shipping costs, and the thickness of the material. Labor to install marble or granite countertops typically ranges from $35 to $45 per hour. Granite and marble tile and slab costs compare as follows:

• Marble tile: $7–$10

• Granite tile: $5–$15

• Marble slab: $25–$60

• Granite slab: $50–$100