Get matched with top garage pros in Munising, MI

Yes, you can pressure wash epoxy floors, but you must take precautions to avoid damaging the surface. While most epoxy floors can be cleaned with a mop, you might choose to pressure wash if the floor is stained, has ground-in dirt, or is covered with mold or mildew. To do so safely, first soak any stains or dirty areas with a gentle cleanser. Use a lower pressure setting with a gentle nozzle, such as a green, white, or black tip, or a 45-degree angled tip. Keep the spray nozzle at least 18 inches away from the floor to protect the surface. Using a surface cleaner attachment or a rotary scrubber can also help prevent overspray. Be cautious if using a power washer that heats the water, as the combination of heat and pressure may be too powerful and could damage the epoxy coating.

An average two-car garage size is about 580 square feet. A common dimension for a two-car garage is 24-feet deep by 24-feet wide, as measured by the interior width. However, the manufacturing of larger vehicle sizes means many homeowners want to build bigger garages. It’s not uncommon for a two-car garage to be 30-feet by 30-feet.

The best method for painting a garage door depends on the door's design and the finish you want to achieve. For the most professional-looking finish, especially on doors with panels or intricate details, a paint sprayer is an excellent choice. It can easily get into hard-to-reach places and provide a smooth, even coat.

If you don't have a sprayer, or if your door is flat, a combination of a roller and a brush is the most effective approach. Use a roller for the large, flat sections to cover the area quickly and efficiently. For the best results, experts recommend a roller with a nap between ⅜ and ¾ inches thick; natural fibers can also help ensure an even coat.

A brush is essential for handling the finer details. Use it to paint grooves, angles, small panels, and the edges of the door where you need more control.

Regardless of the tools you use, it's a good idea to step back after the main application to review your work and use a detail brush to touch up any missed spots.

Garage doors are heavy and close under power, so ensuring they're safe should be one of the priorities of a homeowner. Installing at least one sensor is a good start, but it doesn't hurt to have two, especially considering you can install a secondary system for less than $100. Remember that sensors require calibration and simple but regular maintenance checks— installing them is only the first step.