Get matched with top countertop and backsplash pros in Constantine, MI

A countertop is a broad term that applies to multiple rooms in the house, like kitchens and bathrooms. Meanwhile, a vanity top is specifically associated with bathroom cabinets. In short, all vanity tops are countertops, but not all countertops are vanity tops. When discussing a bathroom, the phrases “countertop” and “vanity top” are used interchangeably.

Yes, epoxy countertops can yellow over time, especially when they are exposed to direct sunlight or UV rays for an extended period. Discoloration is also often a part of the natural aging process of epoxy resin. UV-resistant epoxy products and a protective topcoat can help minimize yellowing and maintain the countertop's original appearance for extended periods.

Engineered stone countertops range in price between $60 and $200 per square foot. The three main types are quartz, recycled glass, and sintered stone. The most affordable is sintered stone, which is ideal for outdoor kitchens and costs $60 to $100 per square foot.

Recycled glass countertops fall in the middle at $65 to $140 per square foot and offer a very distinct look. Meanwhile, quartz counters are on the higher end of the price range at $50 to $200 per square foot. Popular quartz options mimic the look of natural stones like marble and granite.

Yes, Corian® and other solid surface materials can be cut with standard woodworking tools, such as a circular saw or a jigsaw. However, it is crucial to use the correct type of blade to avoid damaging the material.

For a circular saw, a tungsten carbide-tipped blade is required; a triple chip grind blade is highly recommended. For a jigsaw, you should use a fine-tooth down-cutting blade. Do not use blades designed for cutting wood, as they can cause microfractures that weaken the edges of the countertop. A diamond blade is also unnecessary, as those are designed for harder materials like natural stone, which Corian is not.

After cutting, the edge will be rough. It is essential to sand and smooth the cut edge to prevent microfractures, which can eventually compromise the integrity of the countertop.