Get matched with top structural engineers in Woolwich, ME

Q: How do material selection and structural changes influence the cost of a garage remodel?

• <div><p>Costs depend on material choices, labor, and the extent of structural modifications.</p></div>

Q: What is the 10 10 rule in construction?

• <div><p>The 10 10 rule describes the formula most contractors use to determine how much to charge for a job. Allowing for 10% overhead above the total projected cost to do the work and 10% profit sets a contractor up for success, even if there are delays or other problems on the project. This formula isn&rsquo;t a hard-and-fast rule, but it is a ballpark figure to begin with when estimating your expenses on a job.</p></div>

Q: What does a structural engineer's report include?

• <div><p>A structural engineer's report provides a professional assessment of a property's structural condition. It typically includes an evaluation of the foundation, key structural elements like roof trusses, floor joists, studs, beams, and rafters. The report will also contain a detailed description of the engineer's findings, often supported by photographs, and provide recommendations to correct any identified issues. Depending on the scope of the inspection, it might also include an assessment of property drainage, potential issues from environmental conditions like extreme weather or tree placement, and an estimated time and cost for any recommended repairs.</p></div>

Q: For which type of foundation cracking should a structural engineer be recommended?

• <div><p>The <a href="https://www.nahb.org/">National Association of Home Builders</a> requires repair of any foundation crack of more than one quarter of an inch, although local regulations may vary. In general, any visible crack that is growing in size, allowing water through, or that you have just noticed, is a good reason to call a structural engineer. Cracks can be a sign of a <a href="https://www.angi.com/articles/sinking-foundation.htm">sinking foundation</a>, so an inspection is a good idea for your peace of mind.</p></div>

Q: How much weight does a 4-inch concrete slab support?

• <div><p>A 4-inch-thick concrete slab can support around 4,000 pounds per square foot if a contractor reinforces the slab with rebar, while that same slab without reinforcements will support closer to 1,000 pounds. For the purposes of a patio, 4 inches in thickness without reinforcement should suffice unless you&rsquo;re installing heavy kitchen equipment or a hot tub on it. In those cases, reinforcing your slab and sticking with 4 inches of thickness should provide plenty of strength.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your structural engineering project in Woolwich, ME?

Select your specific project to find the pro for you.

Verified Reviews for Structural Engineering pros in Woolwich, ME

*The Angi rating for Structural Engineering companies in Woolwich, ME is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

*The HomeAdvisor rating for Structural Engineering companies in Woolwich, ME is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Structural Engineering needs.

Last update on June 25, 2024

Reviewed in June 2024
Wow. The job was to build a porch/deck at ground level where a brick patio was. Russell came out to look at the job and the site. I described what I was thinking and its functionality--to get the dogs out of the mud before coming in the back door, and drainage for heavy rain, and to dress...
Davis Deck Solutions
Request a quote
Reviewed in May 2022
They come across as really nice guys. I feel like a fool for being taken advantage of. 1st we started the demo in February. They did not cover the floor vents and filled them with dirt and debris, damaging my heating system. The system shut down and a water pipe they should of shut off broke. 2....
Shamrock Home Improvements
Request a quote
Reviewed in June 2021
Randy LaClair is the real deal with appropriate background and firsthand experience in engineering, design, construction, restoration, and repair. My inspection was like a master class in engineering and construction! I came away with some very welcomed knowledge thanks to Randy.
RKL Home Inspections
Request a quote
Reviewed in January 2021
Great attention to details. Good clean up. There was a rotted section that was expertly cut out and replaced. Another area of concern was where an addition was added onto existing structure, Cory fixed that weak area. I have two other structures that I will be having Empire come back to add new...
Empire Roofing
Request a quote
Reviewed in August 2015
Our kitchen remodel included removing a load bearing wall and reconfiguring a galley kitchen with 3 passageways into a U shaped kitchen, and closing off unnecessary doorways. Additionally wood flooring was replaced in 3 adjacent rooms. Eitan -the sales and project manager- provided very good...
Treeium Remodeling & Construction
Request a quote
Reviewed in July 2014
Leo and Lief removed the roof of the residence, removed most of the sheet rock, most of the insulation, and all of the framing members that they wanted from the roof. Then winter set in. The building was left open to the elements and continued to decay. In the spring I touched base with Lief...
Castonguay&Son
Request a quote
Reviewed in May 2014
He explained what he was doing, showed us clearly when it was finished, <br /> and refrained from pointing out all the other structural work that we <br /> know needs to be done. We are pleased with the work of Fred and his <br /> crew. He is obviously capable of doing much more complicated...
Upright Building Services
Request a quote
Reviewed in June 2013
Contractor arrived on time, did his work carefully and professionally, is a solid carpenter and engineer, very personable. Followed up with subcontractors nicely--was an all round positive experience. i would recommend him to anyone needing small or big contracting jobs done.
N-E Construction LLC
Request a quote
Reviewed in January 2012
Their work was professional with heavy interaction with me and my requirements. The structure of the porch and new foundation was rebuilt with up-to-date engineering techniques (engineer on staff). The porch looks identical to the photos from 1900 and is built to last another 150 years. This is...
Morse & Doak Builders Inc
Request a quote

Find Structural engineers in Woolwich

Solid Framing Engineering, LLC

5.0(

)

Serving Woolwich, ME and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Small jobs welcome

"Jacob Schott of Solid Framing Engineering was/is phenomenal is his support as a structural engineer. Mr. Schott listened, and heard, what the requirements were. He proposed acceptable, structurally engineered solutions in a timely, professional and thorough manner. We hired Jacob Schott of Solid Framing Engineering to aid in ensuring that residential new build actions would adhere to structural safety & longevity standards. Our requirements consisted of a rather large deck, a bridge (12?x29?) with a cover/portico section and exaggerated soffits. All these requirements were in Mid-coast Maine where significant winds, attacking from various directions, are prevalent and cause for multi-axis planning to control potential environmental considerations. Mr. Schott continued to provide engineering advice/direction after the sub contractor failed to adhere to specifications and induced the need for modified engineering solutions?even after having concluded the initial scope of work."

Response time1 day

9 neighbors recently requested a quote

Request Quote

Pine woods construction

New to Angi

Serving Woolwich, ME and surrounding areas

We are an owner operated business with a hands on home improvement contractor we can handle any project, repairs, or restorations. We strive to be your go to remodeling contractor. Doing all phases of construction and remodeling from interior to exterior, kitchen and bathroom remodel, to structural and finish carpentry.

Request Quote

Structural Engineering questions, answered by experts

Costs depend on material choices, labor, and the extent of structural modifications.

The 10 10 rule describes the formula most contractors use to determine how much to charge for a job. Allowing for 10% overhead above the total projected cost to do the work and 10% profit sets a contractor up for success, even if there are delays or other problems on the project. This formula isn’t a hard-and-fast rule, but it is a ballpark figure to begin with when estimating your expenses on a job.

A structural engineer's report provides a professional assessment of a property's structural condition. It typically includes an evaluation of the foundation, key structural elements like roof trusses, floor joists, studs, beams, and rafters. The report will also contain a detailed description of the engineer's findings, often supported by photographs, and provide recommendations to correct any identified issues. Depending on the scope of the inspection, it might also include an assessment of property drainage, potential issues from environmental conditions like extreme weather or tree placement, and an estimated time and cost for any recommended repairs.

The National Association of Home Builders requires repair of any foundation crack of more than one quarter of an inch, although local regulations may vary. In general, any visible crack that is growing in size, allowing water through, or that you have just noticed, is a good reason to call a structural engineer. Cracks can be a sign of a sinking foundation, so an inspection is a good idea for your peace of mind.

A 4-inch-thick concrete slab can support around 4,000 pounds per square foot if a contractor reinforces the slab with rebar, while that same slab without reinforcements will support closer to 1,000 pounds. For the purposes of a patio, 4 inches in thickness without reinforcement should suffice unless you’re installing heavy kitchen equipment or a hot tub on it. In those cases, reinforcing your slab and sticking with 4 inches of thickness should provide plenty of strength.

The Woolwich, ME homeowners’ guide to structural engineering services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Timothy Moore
•
May 30, 2026May 30, 2026
How Much Does It Cost to Install an LVL Beam? [2026 Data]
Looking to remove load-bearing walls and vertical supports to open up your living space? Learn about what affects the cost to install an LVL beam.
Lyle Hendriks
•
May 5, 2026May 5, 2026
How Much Does Beam Installation Cost [2026 Data]
Beam installation costs are an important consideration if you’re building a home or doing renovations. Learn about average costs and factors in this guide.
Alison Kasch
•
Apr 4, 2026Apr 4, 2026
How Much Does It Cost to Remove a Load-Bearing Wall? [2026 Data]
Do you have a load-bearing wall standing between you and your projects that you want to remove? Learn about the cost of removing a load-bearing wall.
Rachel Hoffman
•
May 21, 2026May 21, 2026
What to Expect From a Structural Engineer Foundation Inspection
Identify potentially serious problems with your foundation with an inspection from a structural engineer.
Rachel Hoffman
•
May 2, 2026May 2, 2026
Structural Steel Beam vs. Wood Beam: Which Is Right for You?
Structural steel and wood beams ensure your house is structurally sound. Learn the difference between steel and wood beams and how to choose the right one.
Em Norton
•
Apr 10, 2026Apr 10, 2026
Everything to Know About LVL Beams
What is an LVL beam? Read about LVL beams to determine if this material is safe and suitable for your project.