Get matched with top bathtub restoration pros in Penobscot, ME

It takes about 24 hours for the tub resurfacing smell to go away or the total dry time, although you will notice it the most during the first couple of hours. Refer to the manufacturer’s instructions or ask your bathtub resurfacing pro how long it takes for the smell to dissipate. 

Surprisingly, cleaning an air bath is almost as easy as relaxing in one. Most air baths have a self-cleaning or drying cycle to remove moisture from the inner tubing. This prevents mold and keeps the tub ready for your next soaking session. For deeper cleaning, use mild soap and a soft cloth to wipe the surfaces and periodically clean the air jets as the manufacturer recommends.

There are a few ways to check whether your tub is fiberglass or acrylic. If your tub is a color other than white, then your tub is likely acrylic (as fiberglass tubs are usually white). Check to see if there is discoloration on the bottom of the tub, because if it’s yellowed, then you can be fairly sure it’s fiberglass.

Also, fiberglass tubs have thinner edges and are cool to the touch. Acrylic, on the other hand, is either room temperature or warm to the touch.

Bathtubs chip for a number of reasons. The primary cause is simply an accumulation of accidents or direct impact from objects over time. Heavy items will do this, like an iron, but so will lighter objects, like shampoo bottles, especially if you drop them from high enough.