Get matched with top gas leak repair technicians in Dayton, ME

Some cities or states may require you to have an earthquake gas shut-off valve. Your insurance provider may also have requirements for installing this valve. Even if you don’t have to have one by law, it’s wise to have a natural gas plumber install one anyway. These devices can be lifesaving and prevent fires or explosions in the event of a gas leak.

The easiest way to empty a propane tank is to simply use it until no propane remains. If you’re short on time and need a faster solution, transfer the propane to another tank instead. Wear leather gloves to protect your hands, then connect the hoses from both propane tanks and seal them tightly. Turn the knob to open the supply tank valve on the full tank and let it run until the pressure pushes all the propane into the other tank. When all propane is transferred, remove the hose and seal each tank. 

Fixing a gas leak costs about $45 to $150 per hour for a plumber or gas line specialist. The job’s overall cost will vary depending on the location of the leak. A leaky junction or connection behind the stove or dryer will likely cost about $120 to $170. But for a leak that requires a gas fitter or plumber to excavate a pipe in the yard, the cost could rise to $1,500 to $5,000. Keep in mind that gas leaks are very serious issues, so don’t hesitate to contact a plumber or gas line specialist immediately.

Replacing a gas valve on a water heater will take a professional plumber between 1 and 1½ hours. However, they may require extra time to diagnose the problem with your water heater, particularly since so many of the surrounding parts work together. Speak with your plumber before the job to confirm the pre-hour price and the approximate length of the job.