Get matched with top dishwasher installation pros in Trappe, MD

Yes, a dishwasher needs an air gap to prevent backflow. Additionally, in many locations, air gaps or another measure to prevent backflow are required for building code compliance. There are alternatives to an air gap, like a Studor vent or a loop and trap design, but an air gap is the simplest and most popular solution.  

Water is sitting at the bottom of your dishwasher, likely because the filter is dirty with food debris or because the drain hose has a clog. If the water is still sticking around after following the steps above, it’s time to contact a local plumber.

Yes, if your filter is damaged or simply too debris-filled to be of use, replace it with a new component. Check the instruction manual that accompanied the dishwasher for information as to the specific part. There are many online marketplaces that sell these parts, but perform due diligence to ensure you buy the right one.

The correct water temperature for your dishwasher depends on the washing phase. When water enters the machine, it should be around 120 degrees Fahrenheit, but no hotter than 150 degrees. During the wash cycle, the machine will heat the water to between 130 and 140 degrees. If your dishwasher has a sanitizing cycle, the water can reach a temperature of up to 180 degrees.