Get matched with top dishwasher installation pros in Paxton, MA

The correct water temperature for your dishwasher depends on the washing phase. When water enters the machine, it should be around 120 degrees Fahrenheit, but no hotter than 150 degrees. During the wash cycle, the machine will heat the water to between 130 and 140 degrees. If your dishwasher has a sanitizing cycle, the water can reach a temperature of up to 180 degrees.

Yes, a dishwasher needs an air gap to prevent backflow. Additionally, in many locations, air gaps or another measure to prevent backflow are required for building code compliance. There are alternatives to an air gap, like a Studor vent or a loop and trap design, but an air gap is the simplest and most popular solution.  

Water is sitting at the bottom of your dishwasher, likely because the filter is dirty with food debris or because the drain hose has a clog. If the water is still sticking around after following the steps above, it’s time to contact a local plumber.

You should deep-clean your dishwasher every month for optimal performance. A simple scrub down using a homemade vinegar liquid solution is all you need, but don’t use cleaners that aren’t for dishwashers. 

If your dishwasher needs repair, expect to spend between $50 and $100 or $100 to $200 per hour to hire a dishwasher repair technician to service your machine.

Treat hard water with water treatment tablets to keep your dishes from getting spotty in between washes. Drop one of these into your dishwasher monthly and run a basic cycle with the machine empty.