Get matched with top drain cleaners in Jefferson, MA

The cost to unclog a drain varies based on the location and severity of the clog. For simple clogs within your home, such as in a sink, toilet, or shower, hiring a plumber typically costs between $110 and $350, with an average of around $200. Snaking a toilet or sink usually costs between $110 and $275, while a bathtub or shower clog costs about $225.

For a more serious clog in the main sewer line, the cost is higher. Clearing a main line clog generally costs between $200 and $600, with an average of about $380. However, prices can range from as low as $100 for snaking a minor clog to over $1,600, particularly if advanced methods like video inspection and hydrojetting are needed for a large or hard-to-reach blockage. Some severe main line clogs can cost upwards of $1,000 to clear depending on factors like the cause of the clog, its distance from an accessible cleanout, and whether the pipe is located beneath an occupied space (e.g., in an apartment building). You may be able to save money on minor clogs by using a drain snake or bladder yourself.

Applying drain cleaner is a common DIY solution to clogged drains, but it can be extremely harmful to your pipes and lead to corrosion and leaks. It is almost always better to try snaking a clog than using a drain cleaner, but the best solution is to hire a professional plumber. They can locate the clog and gauge the severity using a camera system and then decide if using a plumber’s snake, auger, or drain cleaner is the best option to remove the clog and limit damage to your plumbing system.

Usually it’s fine to leave a toilet clogged overnight, as long as it’s not close to overflowing. In some cases, the extra time may give the clog time to work itself out. For example, if it’s caused by an excess of toilet paper, letting it sit could result in the clog dissolving and you may be able to simply flush it away by the time you wake up. 

Only let it sit though if you have more than one toilet in the home.

Yes, flushing a clogged toilet can make it overflow. While flushing the toilet may push enough pressure through the system to dislodge the clog, this is unlikely. Your best bet is to use a plunger and hope the suction can break up whatever is blocking the pipe. If this doesn’t work, use a plumbing auger or call a pro to help.