Get matched with top stone and gravel pros in Vinton, LA

Depending on the amount of soot present, you can vacuum some of it using a brush attachment on your vacuum cleaner. Then, remove the leftovers with a mild cleaner, such as dish soap or vinegar mixed with water. Before applying a cleaning solution, saturate the bricks with clean water to prevent the cleaner from penetrating beyond the surface and causing structural damage to the bricks.

Cobblestone can be made from many different types of stones but the most common ones, by far, are granite, basalt, limestone, and sandstone.  If you are laying a brick paver patio or other such project, the medium is different. It’s rare, but cobblestone can also be made from marble, slate, jasper, and other types of rock. Technically, you can make cobblestone from almost any type of rock, but if it is weather-resistant and stands the test of time is another question entirely.

You should generally drill into the mortar joints when installing shutters on brick. Mortar is softer, which makes drilling easier and puts less strain on your tools. It also lowers the risk of cracking a brick—something that’s a lot harder to fix. Mortar holds fasteners well enough for standard shutters, and if you ever need to patch the holes later, it’s a much simpler job than dealing with damaged brick. Just keep in mind that if your mortar joints are too thin or the hardware calls for brick anchoring, you'll need to check the manufacturer’s recommendations and adjust accordingly.

Brick stain doesn’t peel or chip and is much more durable than painting. That’s because the staining is absorbed into the brick instead of lingering on the surface as paint does. The color retains even under extreme weather conditions. Therefore, brick stain will save you a lot of time and cost on maintenance in the long run.