Top-rated masons.

Best masons near Plain Dealing, LA

Enter your zip and get matched with up to 5 pros

Need a pro for your masonry work project in Plain Dealing, LA?

Select your specific project to find the pro for you.

Top-Rated Masons in Plain Dealing - Updated Nov 2026

E-Tex Foundation Repair
4.3(
44
)
Concrete Foundation - InstallConcrete Foundation - RaiseConcrete Foundation - Repair

Serving Plain Dealing, LA and surrounding areas

In business since 1975

Free estimates

Emergency services offered

"Mr. Ed Wise at E-Tex Foundation Repair in Gladewater, Tx (903-331-3278) said the procedure would take a total of three days, told me everything that needed to be done, and kept in touch.  He called the day before to tell me they were coming out the next morning.   He and the crew were very friendly, and worked quickly, efficiently, and professionally.  After digging out four pier holes, they laid cement and left it to dry through the next day.  He called the next day and let me know when they were coming out on the third morning.  They arrived on time and jacked the slab to re-level and shimmed with solid concrete blocks and plate steel shims.  Ground areas that had been lost were filled in with dirt and well-packed, and concrete pieces and dirt stabilized my driveway.  Everything was cleaned up from the work area, and I was extremely happy with the results.  I would recommend this company of very friendly, very competent people to everyone I know.  With the work guaranteed (with a transferable warranty) for 30 years, I have nothing but the best to say about the people and the services rendered.  Excellent communication from Mr. Wise beginning with my first email to the company for a bid through the completion of the job!
"
Recommended by80%of homeowners
Avatar for Olshan Foundation Repair - ArkLaTx
Olshan Foundation Repair - ArkLaTx
3.6(
62
)
Concrete Foundation - Repair

Serving Plain Dealing, LA and surrounding areas

In business since 1933

Free estimates

Warranties offered

"I would have hired them but unfortunately for them my house did not have a foundation problem. The owner and his rep both came to my house; they were very professional, knowledgeable and polite. They also gave me advise on what the problem could be and the contractor's contact information."
Recommended by97%of homeowners
Showing 1-10 of 43
Masonry FAQs, answered by experts

Solid brick structures can last a century or more, potentially 100 to 150 years with proper maintenance like tuckpointing. Without major repairs, classic red bricks may last 20 to 40 years. Brick veneer siding is also a long-lasting material, with a lifespan ranging from 50 to 100 years, provided it is properly installed and maintained. To maintain brick veneer, you should scrub it annually with a special detergent and a soft-bristled broom. It's also important to inspect the bricks and mortar regularly and hire a masonry contractor for any necessary repairs, such as fixing worn mortar or bowing bricks.

While painting can certainly change the look of a chimney, you should think twice about giving your brick chimney the old landlord special.

Painting brick is porous, meaning it’s full of tiny holes that can soak up moisture. Those holes also allow it to dry, though. So, when you paint it, you trap any moisture inside, providing an opportunity for mold, mildew, and water damage.

Paint also shows wear faster than naked brick. This means that once you paint a brick surface, you’ll have to keep painting it to maintain a clean look. A paint job is also harder to undo on brick because of its porous nature. Once you paint it, it’s hard to go back without some serious power washing—another added cost.

Initially, brick staining is not cheaper than painting. However, while it has a higher up-front cost, it may be more cost-effective in the long run. Brick stain can last for 20 years or longer, compared to paint, which usually starts to peel away in three to five years.

Yes, brick houses are better insulated, because the bricks slow down the passage of air from the outside to the inside and vice-versa. This helps to stabilize the internal temperature of the home. When combined with proper residential insulation, brick houses are more efficient and better insulated than other types.

The best tool for drilling into brick or mortar is a rotary hammer drill which is a large hammer drill with low rotation speed and high torque. Regular drills with a hammer function are also excellent tools for drilling into brick when the diameter of the hole is 1/2 inch or less. It might be possible to drill into brick with a standard drill if you’re only drilling a very small hole, but note that masonry work will put a lot of wear on a standard drill, and the tool may not be strong enough to get through brick.

The Plain Dealing, LA homeowners’ guide to masonry services

From average costs to expert advice, get all the answers you need to get your job done.