Top-rated floor polishers.

Get matched with top floor polishers in Albany, LA

Enter your zip and get matched with up to 5 pros

Need a pro for your floor polishing project in Albany, LA?

Select your specific project to find the pro for you.

Find Floor polishers in Albany

Avatar for Holywood LLC.
Holywood LLC.
5.0(
9
)
Clean & Polish Flooring - For Business

Serving Albany, LA and surrounding areas

In business since 2021

Free estimates

Credit card accepted

"This company is great! Prompt, courteous, helpful. They were hired to replace the flooring in our entire house and were in and out in 3 ( three) days, cleaned up after themselves, moved and replaced all furniture. I can’t say enough about them!"
Refinishing
Refinishing
Additional Photos
Additional Photos
Additional Photos

+69

Recommended by100%of homeowners
...
Showing 1-10 of 54
Floor Polishers questions, answered by experts

Services typically take 2-4 hours, depending on the area size and floor material.

Most DIY floor cleaners don’t require rinsing, but you’ll want to make sure you don’t add too much dish soap or oil to the cleaner to avoid having to rinse it after cleaning. For non-wood floors, mix 8 parts warm water, 1 part vinegar, and 1 part baking soda with a few drops of dish soap. For wood floors, use olive oil in that same mixture instead of the vinegar. You can let these solutions air-dry after cleaning your floors with them, although you should manually dry your floors if they aren’t waterproof.

A floor polisher won’t remove scratches from a wood floor, but the polish can fill in surface scratches and make them all but invisible. If you run your fingernail gently over the scratch and it doesn’t catch, chances are that the polish will hide it. If it does catch, you might want to have your floors fully refinished, and you might need to have a professional floor sander in for particularly deep scratches. When in doubt, call a professional floor polisher to determine if polish will fill in your scratches or if you need more in-depth services.

Regular vacuuming, deep cleaning, and prompt stain removal help maintain appearance and durability.

Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don’t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.

The Albany, LA homeowners’ guide to floor polishing services

From average costs to expert advice, get all the answers you need to get your job done.