Get matched with top ceramic tile pros in Liberty, KY

The cost to install porcelain tile is about $1,930 on average. Porcelain tile prices range from $880 to $3,000 or more. The average cost tends to be higher than ceramic tile because porcelain tile is very durable. Porcelain tile rating also factors into the material cost. Tile ratings are as follows:

• Grade 0: Walls only

• Grade 1: Walls and light traffic floors

• Grade 2: Rooms with light traffic, but not kitchens or hallways

• Grade 3: Kitchens, hallways, and entryways

• Grade 4: Any area, interior or exterior

• Grade 5: Highest durability good for any area, interior or exterior

Tile installation can be expensive because it requires more time and labor to install than many other materials. For example, laminate flooring can click and lock into place, and carpet comes in large rolls that you can secure to the floor. On the other hand, tiles need to be cut, laid individually, grouted, and left to cure.

When working on your bathroom floor tiling, you should always tile the floor first and then refit the toilet afterward. This has both practical and visual advantages—the tile will have a better seal, and the installation will look cleaner.

On the other hand, when you try to cut the tiles to fit around the toilet, you’re putting yourself at a disadvantage. It’s a lot more work, it’s hard to be precise, and mistakes or miscalculations can lead to future moisture damage to the tiling, grout, and subfloor.

On average, tiling a bathroom involves about 12 hours of labor, usually spread over two to three days to accommodate prep work and curing times. A professional tiler can often complete the installation in 6 to 8 hours, whereas a DIYer might take 10 to 16 hours. The total project time is influenced by factors like the bathroom layout, tile type, and necessary prep work, such as removing old tile. The process includes specific timelines for different areas; for example, tiling a floor takes about six hours, while a shower area can take six to ten hours. It is essential to allow for adequate curing time—typically 24 hours each—for the mortar, grout, and caulk, which is why the project extends over several days.