Get matched with top roofers in Hyden, KY

The most obvious and severe sign of a roof leak is the presence of wet spots on your ceilings, specifically on the top floor of your home. You can also identify a roof leak from your attic if you see sagging insulation or if you notice mold growth or water stains on the rafters or the underside of the roof deck. From the street, look for cracked or missing shingles, moss growth, and shingles that are curling upward, all of which can suggest a leak.

Removing snow from your roof can help prevent ice dams, but the best thing to do is address insulation issues in your attic. If you do decide to remove the snow manually, you should always use a roof rake rather than a shovel. You shouldn’t climb your snowy roof in any circumstance, and roof rake allows you to remove the snow from the ground or a ladder. For the best results, remove snow as soon as possible after it falls.

Metal roofs have a reputation for being noisy, but with proper installation and adequate insulation, they are not significantly noisier than shingle roofs. The type of metal used can affect the sound level; for instance, steel roofs are typically noisier than slate or asphalt tiles but quieter than aluminum. While some people find the sound of rain on a metal roof pleasant, you can take steps to reduce the noise. Installing a thicker underlayment, adding insulation between the roof and the house, or using acoustic tiles can effectively muffle the sound. The gauge (thickness) of the metal roofing can also contribute to sound dampening.

16-gauge galvanized steel staples with a minimum crown of 15/16 inches or 24 millimeters are occasionally used to install shingles. However, most shingle manufacturers or residential building codes don’t recommend staples as a roofing fastener. Roofing nails are preferred in most cases, especially in areas that get a lot of heavy wind.