"I estimate I have just under $100k in electronics and appliances in my house. We have significant lightning storms in my location. To NOT have lightning suppression installed is significant risk in my mind based on my location in New Jersey. RS LIGHTNING PROTECTION was responsive with a quick cost estimate and a reasonable price based on my research for installation. By the way...installation is part art, such as bends in cable are not more than 90 degrees. It's not just about running grounded cables. This installation in conjunction with surge protection on my electrical panel performed by my electrician and cable protection gives me significant piece of mind that all my appliances and electronics are protected from lightning and any potential surge generated by a near strike. Mr Richard Sherlock knows his subject. Highly recommended. Five stars."
"Mr. Jim Gorman who is the owner of the business called me back within a half hour of my email posting. He visited my home 3 days later, inspected things, and told me what the approximate cost would be. He and his helper then installed an entire lightning protection system on both my house and a back garage/storage area. He did things exactly as I wanted in every way. Also threw in a free weathervane which increased the beauty of my home. I would have no objection to recommending this gentleman and his company to anyone who is in need of a competently installed lightning protection system for their home/property. MID-AMERICA LIGHTNING RODS is one fine company run by a man who cares about doing good work according to the latest safety codes etc. Having lost my previous retirement home to lightning, it was very important to me to get this job done and quickly because the thunderstorm season is upon us and with the climate change, those storms are very wicked, especially here out in the country where i live!"
"Eli with Pioneer Electric did a great job with our electrical needs. The job was done quickly and affordably, with real professionalism and expertise. I have used Pioneer several times over the last couple years, and they are my first call any time I need Electrical work done. Buy this service with confidence."
"The install was scheduled and completed quickly. The lightning rods and cable look neat and tidy along the roof. Mr. Hamilton was friendly and efficient."
"We have been hit twice by lightning by God's grace either one hit our home however the last strike burnt art motorhome to the ground William was hired to install lightning protection lightning rods on our home and two out buildings he took the time to explain to us everything we needed to know answering every question professionally conducted himself in the utmost professional manner I would highly recommend lightning rods and even more highly recommended hiring William to do the job we are going to do an expansion later on and he will be the one and only contractor I will call to continue our lightning protection"
Respectful. Reliable. Service Reimagined.\nWe are the leading plumbing contractor in Kentucky. Our licensed plumbers serve residential and commercial clients in Louisville and Lexington. Our construction department is among the largest in the state.\n\nWe give each customer and project, regardless of size and cost, the same quality plumbing services while working within the customer's budget. We stand behind our workmanship long after the project is complete. \nOur people are what make the difference. Here's what you can expect from your Dauenhauer service technician:\n\nHighly skilled and trained to solve any problem\nHas passed extensive background checks and regular drug testing\nIdentifiable and proud to represent Dauenhauer\nProfessional and neatly uniformed\nDrives a Dauenhauer service vehicle equipped with a multitude of parts and tools\nWears shoe covers inside your home out of respect
"All I can say is...wow! Adam is hands down the best handyman in the Red River Gorge area. His professionalism, expertise, attention to detail, and going the extra mile is what sets him apart from everyone else. I couldn't be more please with the quality of the work and repair he performed at our A-frame cabin. If you are looking for someone who TRULY knows what they are doing, provides before and after photos along the way, and is customer service focused, Adam and crew are the team for you. I gave 5-stars only because 5 was as high as I would go. I would have given 10/5 stars if I could. Thank you for all the help!"
Yes, it's possible to have electrical receptacles and overhead lights on the same circuit. The reason is that lights typically use much less power than large appliances, so combining them won't overload your circuit. By doing this, you can distribute the power consumption throughout the breakers in your panel more efficiently, which can be helpful if you have a lot of different electrical devices in your home.
Yes, you can daisy chain outlets, which involves connecting multiple outlets in series. However, ensuring the circuit can handle the additional load is important to avoid overloading and tripping the breaker. The total number of outlets on a single circuit should not exceed the recommended limit, typically eight on a 15-amp circuit. Hiring a licensed electrician is always advisable for complex installations or if you're unsure of what to do.
If your outlet is testing fine but keeps tripping, that’s a sign your GFCI outlet is working, but there’s a problem somewhere else. Try plugging in different devices and see if the outlet keeps tripping. If it’s not the appliance that’s causing the issue, it could be a problem in your wiring. Faulty wiring can be a source of electrical fires and other serious problems. We recommend arranging an inspection by an electrician if an outlet appears to be working but keeps tripping.
If your microwave is on the fritz and you suspect the fuse has blown, you can check it to confirm it’s the source of the problem. Start by disassembling the panel and carefully checking the fuse filament or ceramic components. If your microwave uses a glass fuse, you’ll likely see discoloration and a melted filament. If your microwave contains a ceramic fuse, you’ll need to use a multimeter continuity tester to check if there’s continuity.
With AC wiring, which is the kind most likely you’ll find at home, the black wire is “hot,” and the white is “neutral.” The bare or green wire is considered the safety ground wire. If you encounter DC wiring, it’s relatively easy to tell positive or negative wires apart. red wires are used to indicate positive voltage and black wires indicate negative voltage.
The Frenchburg, KY homeowners’ guide to electrical services
From average costs to expert advice, get all the answers you need to get your job done.
Is it time to upgrade your electrical panel? For the sake of safety, find out sooner than later by exploring our top signs that it’s time for an upgrade.
