Get matched with top drywall pros in Fleming Neon, KY

Wall anchors are suitable for drywall and plaster walls, which are common in most homes. However, different wall materials may require specialized anchors. For concrete or masonry walls, you'd typically use concrete anchors. When dealing with other wall types, such as brick or tile, specific anchors designed for those materials may be necessary. Always consult with a hardware specialist or check the manufacturer's recommendations to ensure you select the appropriate anchors for your specific wall type.

Drywall can be installed directly on ceiling joists. In fact, this method is common in many construction projects. Drywall sheets are attached to the joists using screws, ensuring a secure and stable installation. Before attaching the drywall, it's important to mark the joist locations on the ceiling, allowing for accurate screw placement. Proper spacing between screws and careful taping and mudding of joints are crucial to creating a smooth and flawless ceiling surface. If the joists are in good condition and level, installing drywall directly on them is a practical and efficient approach.

You can prevent air leaks and sagging by gluing a drywall ceiling. However, not every drywall job is a good fit for Sheetrock adhesive, and many pros say ceilings are one of those cases. When you place them properly, drywall screws make ceiling Sheetrock part of your home’s structural support system. 

Adding glue won’t increase the strength of the drywall, and it can make it much harder for you to remove and replace damaged drywall. Adhesive can bridge gaps, though, and it can keep temperature-controlled air from escaping or entering through the ceilings, making rooms more energy efficient.

You should do a little bit of sanding between adding coats of mud. Knock down any ridges or significantly imperfect areas through sanding, which should help you apply the next coat of mud smoothly. If your first coat of mud is pretty smooth after it dries, a quick sanding is all you’ll need. Don’t forget to wipe away any dust after each sanding process.