Get matched with top fencing pros in Calvert City, KY

Ideally, your concrete should set slightly above ground at an angle sloping away from the fence post. This will add extra support and allow water to run away from the wood fence post. Keeping water out will help prevent wood rot. Additionally, you can add soil on top of the concrete for a seamless finish. 

Yes, installing wrought iron fencing will usually require a building permit, as do all types of fencing. Building permits for wrought iron fencing typically cost between $150 and $500, and the price will vary based on where you live and how much your local building department charges. You may also need to pay for a property survey if you’re installing wrought iron fencing on your property line. This type of survey can cost around $500, but it prevents issues with building on neighboring properties, which can be much more expensive in the long run.

Removing fence posts that are set in concrete is something you can't do by hand. You will need an excavator, a strong post-puller, or a jackhammer. If you plan on recycling the concrete base, you may be able to cut the post out with a jackhammer and then set the new post in the existing base. However, it's usually better to remove both the fence post and concrete together. Due to the weight of concrete, you will need a hydraulic removal tool.

A chain link fence typically lasts between 15 and 20 years, but with proper maintenance, it can last for 30 years or more. To preserve the fence, it's important to keep the mesh wire tight, which can be done with a come-along tool every 6 to 12 months. Investing in a fence with a galvanized, powder-coated, or vinyl-coated finish can increase its lifespan to 20 to 30 years and reduce maintenance needs, as these coatings provide extra protection against the elements.