Get matched with top drain pipe installers in Stockton, KS

If your pipes are newly installed, or you recently had plumbing work done, it's normal to have some air in the pipes, which will likely work its way out naturally after using the plumbing a few times. But if you continually hear banging or gurgling due to air bubbles, you might have an air leak, which is best addressed by a plumber. 

No, bleach will not harm PVC pipes. Assuming the bleach is not mixed with any other chemicals, you can dilute it and pour it down a drain that has PVC plumbing. Undiluted bleach won’t hurt PVC pipes, but bleach should be diluted before disposing of it by pouring it down a drain.

If you want to avoid using a snake to unclog a drain, or if you don’t have one, try vinegar and baking soda. Pour 1 cup of baking soda down the drain, followed by 1 cup of white vinegar. Wait for 15 minutes, and then run hot water (but not boiling water) down the drain to see if the clog is clear. Repeat multiple times as needed.

In general, PVC (polyvinyl chloride), PEX (polyethylene), and copper are the three piping materials used in new constructions when adding water supply lines. There are some caveats. PEX and copper are considered ideal when running lines that will handle hot water because they are not at risk for melting and warping the way that PVC piping can. At $0.40 to $4 per linear foot, PEX is considered more affordable than copper pipes, which cost $2 to $12 per linear foot. PVC is considered appropriate in water lines for cold taps only.