Best sink installation pros near Plains, KS

While unplugging your garbage disposal and plugging it back in may help, most units have an actual reset button, a bright red switch found on the underside of your unit. If your garbage disposal needs resetting, you may notice this button sticking out about a quarter of an inch from the surface of the unit, with which it’s usually flush. Simply depress this reset button to reset the unit, and then test to ensure it’s working about 10 minutes later.

There are several types of sink drain stoppers, including pull-out, twist-and-pull, and pop-up. Pull-out sink stoppers can be removed by pulling on the stopper until it comes out of the drain. A twist-and-pull design requires lifting then turning the stopper to lock it in an open position and the opposite action (turning, then pressing down) to close it. A pop-up sink stopper works by pushing down the drain cover to open or close the passageway. 

Pedestal sinks are bolted or screwed into the floor and the wall to prevent it from moving out of place. You may have to change or add to the bathroom flooring when installing a pedestal sink if the flooring was laid around the previous sink, not under it.

No, you don’t need to use plumber’s putty to install a sink drain. Other options are available, such as silicone putty or silicone caulk. Plumber’s putty is the traditional method and it’s easier to work with and easier to remove. It doesn’t need to dry before using. Silicone putty should dry before you use the drain.