Best floor polishers near Oberlin, KS

Q: What if the floor has only lost its luster and not been damaged or blemished?

• <div><p>Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don&rsquo;t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.</p></div>

Q: Can I use a floor grinder to remove paint from concrete?

• <div><p>Yes, but with caution. A floor grinder is intended to level and <a href="https://www.angi.com/articles/how-to-polish-concrete-floors.htm">polish concrete</a>, so it is a very powerful tool. To remove paint, the floor grinder should be set to 35 square feet per minute or less to minimize the pressure without the use of pocket weights. You might need to go over the surface two times to get any paint that has sunk into the concrete&rsquo;s pores.</p></div>

Q: How long does it take to strip and wax floors?

• <div><p>The answer to this question depends on how large the room is and how much experience you have stripping and waxing floors. It will take at least 24 hours to strip the floors, then you must allow time for drying, waxing, waiting for them to cure, and, finally, buffing them. Since you likely will not be working for the full 24 hours, it is safe to say that this is a two- or three-day job.</p></div>

Q: What are the benefits of having my floors cleaned professionally?

• <div><p>There are many benefits to hiring a professional floor cleaner. First, these flooring pros know the right chemicals for your flooring type, which is essential for its longevity. Likewise, they have the proper deep-cleaning equipment, which is often more complex than a mop or broom. Not only that, but deep cleaning your floors can be a time-consuming process, and by hiring a professional, you can spend that time on other home improvement projects. </p></div>

Q: Do vinegar and water strip wax?

• <div><p>Yes, vinegar and water can strip wax. For a DIY wax stripper, mix about a quarter cup of vinegar with one gallon of warm water. You can also mix one cup of cream of tartar, one cup of white vinegar, and one gallon of water. Before using it on a large area of the floor, you should test it in an inconspicuous place to make sure it works like you want it to.</p></div>

Enter your zip and get matched with up to 5 pros

Need a pro for your floor polishing project in Oberlin, KS?

Select your specific project to find the pro for you.

Verified Reviews for Floor Polishing pros in Oberlin, KS

*The Angi rating for Floor Polishing companies in Oberlin, KS is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Floor Polishing needs.

*The HomeAdvisor rating for Floor Polishing companies in Oberlin, KS is a rating based on verified reviews from our community of homeowners who have used these pros to meet their Floor Polishing needs.

Last update on January 09, 2025

Reviewed in January 2025
Josh helped me build 3 cabins to use as AirBnBs and did an outstanding job. He did everything from start to finish: framing, electrical, plumbing, drywall, tile, flooring, trim…etc. He is reliable, hard working and trustworthy. If he still lived in my area, he is the first guy I’d call when I...
JH Construction
Request a quote
Reviewed in July 2024
He is very particular about his work. He showed up when he said he would and cleaned up all of the mess before he left.
Eskew Construction
Request a quote
Reviewed in August 2021
Super nice people. On time. Professional. I thought the price was great. Highly recommend.
Koala Insulation of Southeast Denver
Request a quote
Reviewed in November 2019
It was very good. They showed up on time and got it done.
Aqua Shield Roofing & Construction
Request a quote
Reviewed in July 2015
The repair men were fast workers. They did not have to figure what to do. They did a great job. Cleaned up all the mess and explained how the pump works.
Thrasher Foundation Repair - Wichita
Request a quote

Top-Rated Floor polishers in Oberlin - Updated Nov 2026

No results for Floor polisher in

Try adjusting your search criteria.

Floor Polishers FAQs, answered by experts

Before starting on a full refinishing project, determine if your floors need to be completely sanded down to the bare wood or if the damage is shallow and mostly cosmetic. Deep scratches and gouges will require you to rough sand using a drum sander or belt sander, but small surface scratches or floors that have only lost their luster don’t need a complete overhaul. Instead, you can skip the rough sanding step and sand-screen the old finish with a buffer, removing only the top layer of polyurethane.

Yes, but with caution. A floor grinder is intended to level and polish concrete, so it is a very powerful tool. To remove paint, the floor grinder should be set to 35 square feet per minute or less to minimize the pressure without the use of pocket weights. You might need to go over the surface two times to get any paint that has sunk into the concrete’s pores.

The answer to this question depends on how large the room is and how much experience you have stripping and waxing floors. It will take at least 24 hours to strip the floors, then you must allow time for drying, waxing, waiting for them to cure, and, finally, buffing them. Since you likely will not be working for the full 24 hours, it is safe to say that this is a two- or three-day job.

There are many benefits to hiring a professional floor cleaner. First, these flooring pros know the right chemicals for your flooring type, which is essential for its longevity. Likewise, they have the proper deep-cleaning equipment, which is often more complex than a mop or broom. Not only that, but deep cleaning your floors can be a time-consuming process, and by hiring a professional, you can spend that time on other home improvement projects.

Yes, vinegar and water can strip wax. For a DIY wax stripper, mix about a quarter cup of vinegar with one gallon of warm water. You can also mix one cup of cream of tartar, one cup of white vinegar, and one gallon of water. Before using it on a large area of the floor, you should test it in an inconspicuous place to make sure it works like you want it to.

The Oberlin, KS homeowners’ guide to floor polishing services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles

Angi
•
Oct 22, 2026Oct 22, 2026
How Much Does It Cost to Polish Concrete Floors? [2026 Data]
Discover the cost to polish concrete floors, including price ranges, key cost factors, and tips to help you budget for your next flooring project.
Lyle Hendriks
•
Oct 17, 2026Oct 17, 2026
How Much Does Polished Concrete Flooring Cost? [2026 Data]
Polished concrete floor costs depend on the size of the area you’re targeting and the style of concrete floor. Our guide breaks down all the cost factors.
Stacey L. Nash
•
Jul 9, 2026Jul 9, 2026
How to Polish Your Marble Floors to Perfection
Dull marble floors got you down? This simple guide on how to polish marble floors can revive your floors to a flawless shine.
Samantha Hawrylack
•
Jul 10, 2026Jul 10, 2026
How to Make Your Wood Floors Look Brand New Again
Knowing how to make wood floors look new again can save you a lot of money, and keep your home looking fresh. Here’s everything you must know.
Stacey L. Nash
•
Apr 4, 2026Apr 4, 2026
How to Polish Concrete Floors and Reveal Their Inner Beauty
When it comes to how to polish concrete floors, there’s a lot to know for the would-be DIYer, from pad grit to managing a concrete grinder.
Mizuki Hisaka
•
Jul 31, 2026Jul 31, 2026
Discover 6 Types of Polished Concrete Floors
With so many types of polished concrete floors to choose from, you should first learn about the classes of grinding, levels of polishing, and color options.