Best fireplace pros near Oberlin, KS

Most cleanings take 1-3 hours, but extensive soot buildup or liner damage may require additional time.

Yes, it is possible to convert a wood-burning fireplace to gas. The average cost for this conversion is $3,000, with a typical range of $500 to $5,500. The project involves running a gas line, professionally cleaning the chimney, and installing gas logs.

Cost factors include the type of gas fireplace and whether a new gas line is needed. Installing a natural gas line can add $200 to $1,000 to the cost. Vented gas fireplaces are more expensive, averaging around $5,000, while ventless options are more cost-effective at about $1,500.

There are several ways to determine if your chimney or fireplace damper is open or closed. A simple method is to check for airflow by placing your hand near the fireplace opening; if you feel a draft or hear wind whistling, the damper is open. An open damper might also make the room feel cooler, similar to the outdoor temperature, or cause your HVAC system to work harder than usual. For a more definitive test, you can try a visual inspection, although it may be difficult to see. Alternatively, you can light a small piece of paper and observe the smoke; if it is drawn up the chimney, the damper is open. Always use the damper handle to adjust its position.

Compared to certain types of firewood like pine or spruce—which burn off sticky resin contained within the wood that creates lots of smoke—elm isn’t the worst option for burning in a fireplace.

Because elm wood is dense, it burns at a moderate pace and does a pretty good job of keeping your home warm. Hardwood like maple or oak may perform slightly better, but elm isn’t a bad choice overall.